Hello,

This device works perfectly with usbserial generic, loaded with forced 
vendor/product parameters. Can you please add it to the proper driver?

T:  Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=03f0 ProdID=521d Rev=00.01
S:  Manufacturer=Hewlett-Packard
S:  Product=HP hs3110 HSPA+ Mobile Broadband Device
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 
Driver=usbserial_generic
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=02 
Driver=usbserial_generic
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=03 
Driver=usbserial_generic
I:  If#= 3 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 
Driver=usbserial_generic
I:  If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=07 Driver=(none)
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=05 
Driver=usbserial_generic

Thanks,
Victor Stanescu--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to