On 1 July 2014 12:07, Yegor Yefremov <yegorsli...@googlemail.com> wrote: [..] > > What can be done with these error messages: > > of_get_named_gpiod_flags: can't parse gpios property of node > '/ocp/usb@47400000/usb-phy@47401300[0]' > 47401300.usb-phy supply vcc not found, using dummy regulator > musb-hdrc musb-hdrc.0.auto: Failed to request rx1. > musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 > platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral > of_get_named_gpiod_flags: can't parse gpios property of node > '/ocp/usb@47400000/usb-phy@47401b00[0]' > 47401b00.usb-phy supply vcc not found, using dummy regulator > musb-hdrc musb-hdrc.1.auto: Failed to request rx1. > musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517 > platform musb-hdrc.1.auto: Driver musb-hdrc requests probe deferral > couldn't find an available UDC >
The above are typical deferal messages. Have you tried building everything as a module or moving the DMA devicetree node so it's probed earlier? But I'm not sure it's related to the problem you are seeing. -- Ezequiel García, VanguardiaSur www.vanguardiasur.com.ar -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
