commit 943c13971c08 "usb: musb: dsps: implement ->set_mode()"
should have made it possible to use the driver with boards that have
the USBID pin unconnected. This doesn't actually work, since the
driver uses the wrong base address to access the mode register.
Furthermore it uses different base addresses in different places to
access the same register (phy_utmi).
Signed-off-by: Lothar Waßmann <l...@karo-electronics.de>
---
drivers/usb/musb/musb_dsps.c | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 56c5d3f..1bb34af 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -502,10 +502,9 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
const struct dsps_musb_wrapper *wrp = glue->wrp;
void __iomem *ctrl_base = musb->ctrl_base;
- void __iomem *base = musb->mregs;
u32 reg;
- reg = dsps_readl(base, wrp->mode);
+ reg = dsps_readl(ctrl_base, wrp->mode);
switch (mode) {
case MUSB_HOST:
@@ -518,7 +517,7 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
*/
reg |= (1 << wrp->iddig_mux);
- dsps_writel(base, wrp->mode, reg);
+ dsps_writel(ctrl_base, wrp->mode, reg);
dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
break;
case MUSB_PERIPHERAL:
@@ -531,10 +530,10 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
*/
reg |= (1 << wrp->iddig_mux);
- dsps_writel(base, wrp->mode, reg);
+ dsps_writel(ctrl_base, wrp->mode, reg);
break;
case MUSB_OTG:
- dsps_writel(base, wrp->phy_utmi, 0x02);
+ dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
break;
default:
dev_err(glue->dev, "unsupported mode %d\n", mode);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
