Add device-tree binding documentation for the XHCI controller present
on Tegra124 and later SoCs.

Signed-off-by: Andrew Bresticker <abres...@chromium.org>
---
 .../bindings/usb/nvidia,tegra124-xhci.txt          | 76 ++++++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt

diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt 
b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt
new file mode 100644
index 0000000..fdb8624
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt
@@ -0,0 +1,76 @@
+NVIDIA Tegra XHCI controller
+============================
+
+The Tegra XHCI controller supports both USB2 and USB3 interfaces exposed
+by the Tegra XUSB pad controller.
+
+Required properties:
+--------------------
+ - compatible: Should be "nvidia,tegra124-xhci".
+ - reg: Address and length of the register sets.  There should be three
+   entries in the following order: XHCI host registers, FPCI registers, and
+   IPFS registers.
+ - interrupts: XHCI host interrupt.
+ - clocks: Must contain an entry for each entry in clock-names.
+   See ../clock/clock-bindings.txt for details.
+ - clock-names: Must include the following entries:
+    - xusb_host
+    - xusb_falcon_src
+    - xusb_ss
+    - xusb_ss_src
+    - xusb_hs_src
+    - xusb_fs_src
+    - pll_u_480m
+    - clk_m
+    - pll_e
+ - resets: Must contain an entry for each entry in reset-names.
+   See ../reset/reset.txt for details.
+ - reset-names: Must include the following entries:
+   - xusb_host
+   - xusb_ss
+ - nvidia,xusb-mbox: Handle to the Tegra XUSB mailbox node.
+
+Optional properties:
+--------------------
+ - phys: Must contain an entry for each entry in phy-names.
+   See ../phy/phy-bindings.txt for details.
+ - phy-names: Should include an entry for each PHY used by the controller.
+   May be a subset of the following:
+    - utmi-{0,1,2}
+    - hsic-{0,1}
+    - usb3-{0,1}
+ - s1p05v-supply: 1.05V supply regulator.
+ - s1p8v-supply: 1.8V supply regulator.
+ - s3p3v-supply: 3.3V supply regulator.
+
+Example:
+--------
+       usb@0,70090000 {
+               compatible = "nvidia,tegra124-xhci";
+               reg = <0x0 0x70090000 0x0 0x8000>,
+                     <0x0 0x70098000 0x0 0x1000>,
+                     <0x0 0x70099000 0x0 0x1000>;
+               interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+                        <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+                        <&tegra_car TEGRA124_CLK_XUSB_SS>,
+                        <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+                        <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+                        <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+                        <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+                        <&tegra_car TEGRA124_CLK_CLK_M>,
+                        <&tegra_car TEGRA124_CLK_PLL_E>;
+               clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss",
+                             "xusb_ss_src", "xusb_hs_src", "xusb_fs_src",
+                             "pll_u_480m", "clk_m", "pll_e";
+               resets = <&tegra_car 89>, <&tegra_car 156>;
+               reset-names = "xusb_host", "xusb_ss";
+               nvidia,xusb-mbox = <&mbox>;
+               phys = <&padctl TEGRA_XUSB_PADCTL_UTMI_P1>, /* mini-PCIe USB */
+                      <&padctl TEGRA_XUSB_PADCTL_UTMI_P2>, /* USB A */
+                      <&padctl TEGRA_XUSB_PADCTL_USB3_P0>; /* USB A */
+               phy-names = "utmi-1", "utmi-2", "usb3-0";
+               s1p05v-supply = <&vdd_1v05_run>;
+               s3p3v-supply = <&vdd_3v3_lp0>;
+               s1p8v-supply = <&vddio_1v8>;
+       };
-- 
2.0.0.526.g5318336

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to