Hello.
On 06/09/2014 11:52 PM, Robert Jarzmik wrote:
Use devm_* helpers in the probe function to simplify the error path and
the remove path.
Signed-off-by: Robert Jarzmik <robert.jarz...@free.fr>
---
drivers/usb/gadget/pxa27x_udc.c | 51 +++++++++++------------------------------
1 file changed, 14 insertions(+), 37 deletions(-)
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 6236848..f6843a8 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -2478,8 +2478,9 @@ static int pxa_udc_probe(struct platform_device *pdev)
pxa_udc_probe_pdata(pdev, udc);
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ udc->regs = devm_request_and_ioremap(&pdev->dev, regs);
Isn't this function deprecated in favor of devm_ioremap_resource()?
if (!regs)
s/regs/udc->regs/.
- return -ENXIO;
+ return -EADDRNOTAVAIL;
udc->irq = platform_get_irq(pdev, 0);
if (udc->irq < 0)
return udc->irq;
[...]
@@ -2523,34 +2517,23 @@ static int pxa_udc_probe(struct platform_device *pdev)
pxa_eps_setup(udc);
/* irq setup after old hardware state is cleaned up */
- retval = request_irq(udc->irq, pxa_udc_irq,
- IRQF_SHARED, driver_name, udc);
+ retval = devm_request_irq(&pdev->dev, udc->irq, pxa_udc_irq,
+ IRQF_SHARED, driver_name, udc);
if (retval != 0) {
dev_err(udc->dev, "%s: can't get irq %i, err %d\n",
driver_name, udc->irq, retval);
- goto err_irq;
+ goto err;
Why not just *return*?
}
retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (retval)
- goto err_add_udc;
+ goto err;
Likewise.
pxa_init_debugfs(udc);
return 0;
-err_add_udc:
- free_irq(udc->irq, udc);
-err_irq:
- iounmap(udc->regs);
-err_map:
- clk_unprepare(udc->clk);
-err_clk_prepare:
- clk_put(udc->clk);
- udc->clk = NULL;
-err_clk:
- if (gpio_is_valid(udc->gpio_pullup))
- gpio_free(udc->gpio_pullup);
+err:
return retval;
}
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
