On Sun, Apr 27, 2014 at 04:47:44PM +0200, Bjørn Mork wrote:
> From: Bjørn Mork <bj...@mork.no>
> 
> Preparing for more supported standard device layouts. Keeping
> the matching macros unchanged to avoid breaking stable
> backporting of new device additions.
> 
> Signed-off-by: Bjørn Mork <bj...@mork.no>

Signed-off-by: Johan Hovold <jhov...@gmail.com>

> ---
>  drivers/usb/serial/qcserial.c | 22 ++++++++++++++++------
>  1 file changed, 16 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
> index e282155dd4a1..217e29ccde52 100644
> --- a/drivers/usb/serial/qcserial.c
> +++ b/drivers/usb/serial/qcserial.c
> @@ -22,8 +22,14 @@
>  #define DRIVER_AUTHOR "Qualcomm Inc"
>  #define DRIVER_DESC "Qualcomm USB Serial driver"
>  
> +/* standard device layouts supported by this driver */
> +enum qcserial_layouts {
> +     QCSERIAL_G2K = 0,       /* Gobi 2000 */
> +     QCSERIAL_G1K = 1,       /* Gobi 1000 */
> +};
> +
>  #define DEVICE_G1K(v, p) \
> -     USB_DEVICE(v, p), .driver_info = 1
> +     USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
>  
>  static const struct usb_device_id id_table[] = {
>       /* Gobi 1000 devices */
> @@ -178,11 +184,8 @@ static int qcprobe(struct usb_serial *serial, const 
> struct usb_device_id *id)
>       int retval = -ENODEV;
>       __u8 nintf;
>       __u8 ifnum;
> -     bool is_gobi1k = id->driver_info ? true : false;
>       int altsetting = -1;
>  
> -     dev_dbg(dev, "Is Gobi 1000 = %d\n", is_gobi1k);
> -
>       nintf = serial->dev->actconfig->desc.bNumInterfaces;
>       dev_dbg(dev, "Num Interfaces = %d\n", nintf);
>       ifnum = intf->desc.bInterfaceNumber;
> @@ -230,7 +233,8 @@ static int qcprobe(struct usb_serial *serial, const 
> struct usb_device_id *id)
>        * gets handled by other drivers.
>        */
>  
> -     if (is_gobi1k) {
> +     switch (id->driver_info) {
> +     case QCSERIAL_G1K:
>               /*
>                * Gobi 1K USB layout:
>                * 0: DM/DIAG (use libqcdm from ModemManager for communication)
> @@ -245,7 +249,8 @@ static int qcprobe(struct usb_serial *serial, const 
> struct usb_device_id *id)
>                       dev_dbg(dev, "Modem port found\n");
>               else
>                       altsetting = -1;
> -     } else {
> +             break;
> +     case QCSERIAL_G2K:
>               /*
>                * Gobi 2K+ USB layout:
>                * 0: QMI/net
> @@ -273,6 +278,11 @@ static int qcprobe(struct usb_serial *serial, const 
> struct usb_device_id *id)
>                       dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n");
>                       break;
>               }
> +             break;
> +     default:
> +             dev_err(dev, "unsupported device layout type: %lu\n",
> +                     id->driver_info);
> +             break;
>       }
>  
>  done:
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to