Hi Sylwester,
On Wed, Apr 9, 2014 at 5:41 PM, Sylwester Nawrocki <s.nawro...@samsung.com> wrote: > Hi Vivek, > > On 09/04/14 13:54, Vivek Gautam wrote: >> Adding support to enable/disable VBUS hooked to a gpio >> to enable vbus supply on the port. > > Does the GPIO control a fixed voltage regulator ? If so, shouldn't > it be modelled by the regulator API instead ? No, this GPIO controls a 'current limiting power distribution switch', which gives the output vbus to usb controller. Should i model this as a fixed regulator ? > >> Signed-off-by: Vivek Gautam <gautam.vi...@samsung.com> > [...] >> + /* Get required GPIO for vbus */ >> + phy_drd->gpio = of_get_named_gpio(dev->of_node, >> + "samsung,vbus-gpio", 0); >> + if (!gpio_is_valid(phy_drd->gpio)) >> + dev_dbg(dev, "no usbdrd-phy vbus gpio defined\n"); >> + >> + if (devm_gpio_request(dev, phy_drd->gpio, "phydrd_vbus_gpio")) >> + dev_dbg(dev, "can't request usbdrd-phy vbus gpio %d\n", >> + phy_drd->gpio); > > -- > Regards, > Sylwester > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" > in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
