On Wed, Mar 12, 2014 at 03:01:15PM +0800, Peter Chen wrote:
> On Thu, Feb 27, 2014 at 07:38:23AM +0800, Li Jun wrote:
> > Add b_hnp_enable request handling and enable gadget->is_otg
> >
> > Signed-off-by: Li Jun <b47...@freescale.com>
> > ---
> > drivers/usb/chipidea/udc.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> > index fe30dcc..602bbf3 100644
> > --- a/drivers/usb/chipidea/udc.c
> > +++ b/drivers/usb/chipidea/udc.c
> > @@ -20,6 +20,7 @@
> > #include <linux/pm_runtime.h>
> > #include <linux/usb/ch9.h>
> > #include <linux/usb/gadget.h>
> > +#include <linux/usb/otg-fsm.h>
> > #include <linux/usb/chipidea.h>
> >
> > #include "ci.h"
> > @@ -1098,6 +1099,14 @@ __acquires(ci->lock)
> > default:
> > break;
> > }
> > + break;
>
> This break is needed?
>
Yes, needed.
> > + case USB_DEVICE_B_HNP_ENABLE:
> > + if (gadget_is_otg(&ci->gadget)) {
> > + ci->gadget.b_hnp_enable = 1;
> > + err = isr_setup_status_phase(
> > + ci);
> > + }
> > + break;
> > default:
> > goto delegate;
> > }
> > @@ -1765,7 +1774,7 @@ static int udc_start(struct ci_hdrc *ci)
> > ci->gadget.ops = &usb_gadget_ops;
> > ci->gadget.speed = USB_SPEED_UNKNOWN;
> > ci->gadget.max_speed = USB_SPEED_HIGH;
> > - ci->gadget.is_otg = 0;
> > + ci->gadget.is_otg = ci->is_otg ? 1 : 0;
> > ci->gadget.name = ci->platdata->name;
> >
> > INIT_LIST_HEAD(&ci->gadget.ep_list);
> > --
> > 1.7.9.5
> >
> >
>
> --
>
> Best Regards,
> Peter Chen
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
