Add support of the device tree probing for the Renesas R-Car generation 2 SoCs
documenting the device tree binding as necessary.
Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
---
This patch is against the 'next' branch of Felipe Balbi's 'usb.git' repo.
Changes in version 2:
- restored devm_clk_get() call and the error handling logic in the probe()
method, removed clk_put() call in the remove() method.
Documentation/devicetree/bindings/usb/rcar-gen2-phy.txt | 29 +++++++++++
drivers/usb/phy/phy-rcar-gen2-usb.c | 42 ++++++++++++++--
2 files changed, 68 insertions(+), 3 deletions(-)
Index: usb/Documentation/devicetree/bindings/usb/rcar-gen2-phy.txt
===================================================================
--- /dev/null
+++ usb/Documentation/devicetree/bindings/usb/rcar-gen2-phy.txt
@@ -0,0 +1,29 @@
+* Renesas R-Car generation 2 USB PHY
+
+This file provides information on what the device node for the R-Car generation
+2 USB PHY contains.
+
+Required properties:
+- compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
+ "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
+- reg: offset and length of the register block.
+- clocks: clock phandle and specifier pair.
+- clock-names: string, clock input name, must be "usbhs".
+
+Optional properties:
+- renesas,channel0-pci: boolean, specify when USB channel 0 should be connected
+ to PCI EHCI/OHCI; otherwise, it will be connected to the
+ USBHS controller.
+- renesas,channel2-pci: boolean, specify when USB channel 2 should be connected
+ to PCI EHCI/OHCI; otherwise, it will be connected to the
+ USBSS controller (xHCI).
+
+Example (Lager board):
+
+ usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a7790";
+ reg = <0 0xe6590100 0 0x100>;
+ clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ clock-names = "usbhs";
+ renesas,channel2-pci;
+ };
Index: usb/drivers/usb/phy/phy-rcar-gen2-usb.c
===================================================================
--- usb.orig/drivers/usb/phy/phy-rcar-gen2-usb.c
+++ usb/drivers/usb/phy/phy-rcar-gen2-usb.c
@@ -1,8 +1,8 @@
/*
* Renesas R-Car Gen2 USB phy driver
*
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Cogent Embedded, Inc.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,6 +13,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_data/usb-rcar-gen2-phy.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
@@ -167,6 +168,37 @@ out:
spin_unlock_irqrestore(&priv->lock, flags);
}
+#ifdef CONFIG_OF
+static struct rcar_gen2_phy_platform_data *
+rcar_gen2_usb_phy_parse_dt(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct rcar_gen2_phy_platform_data *pdata;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ pdata->chan0_pci = of_property_read_bool(np, "renesas,channel0-pci");
+ pdata->chan2_pci = of_property_read_bool(np, "renesas,channel2-pci");
+
+ return pdata;
+}
+
+static const struct of_device_id rcar_gen2_usb_phy_match_table[] = {
+ { .compatible = "renesas,usb-phy-r8a7790" },
+ { .compatible = "renesas,usb-phy-r8a7791" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rcar_gen2_usb_phy_match_table);
+#else
+static inline struct rcar_gen2_phy_platform_data *
+rcar_gen2_usb_phy_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
static int rcar_gen2_usb_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -177,7 +209,10 @@ static int rcar_gen2_usb_phy_probe(struc
struct clk *clk;
int retval;
- pdata = dev_get_platdata(dev);
+ if (dev->of_node)
+ pdata = rcar_gen2_usb_phy_parse_dt(dev);
+ else
+ pdata = dev_get_platdata(dev);
if (!pdata) {
dev_err(dev, "No platform data\n");
return -EINVAL;
@@ -236,6 +271,7 @@ static int rcar_gen2_usb_phy_remove(stru
static struct platform_driver rcar_gen2_usb_phy_driver = {
.driver = {
.name = "usb_phy_rcar_gen2",
+ .of_match_table = of_match_ptr(rcar_gen2_usb_phy_match_table),
},
.probe = rcar_gen2_usb_phy_probe,
.remove = rcar_gen2_usb_phy_remove,
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
