On 01/27/2014 03:49 PM, Sarah Sharp wrote:
> Walt reports that the PCI add-in card for his 0.96 ASMedia host dies in
> a particular machine.  This symptom goes away when commit
> 35773dac5f862cb1c82ea151eba3e2f6de51ec3e "usb: xhci: Link TRB must not
> occur within a USB payload burst" is reverted.
> 
> Only 1.0 xHCI hosts actually need TD fragments, so limit that patch to
> only work on 1.0 hosts.  Leave the scatter-gather entry length
> limitation in tact, to ensure consistent buffer limitation lengths
> across host controller versions.  Otherwise we'll have some very
> confused driver writers.
> 
> Signed-off-by: Sarah Sharp <sarah.a.sh...@linux.intel.com>
> Reported-by: walt <w41...@gmail.com>
> Cc: sta...@vger.kernel.org # 3.12
> Cc: David Laight <david.lai...@aculab.com>
> ---
> 
> Walt, will you please put your ASMedia host into the system it failed
> on, and test this patch on 3.13 (or the last vanilla kernel it failed
> on)?
> 
> Thanks,
> Sarah Sharp
> 
>  drivers/usb/host/xhci-ring.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index a0b248c34526..bdda69fd1651 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -2971,6 +2971,8 @@ static int prepare_ring(struct xhci_hcd *xhci, struct 
> xhci_ring *ep_ring,
>                                       TRBS_PER_SEGMENT - 1 - trb;
>                       u32 nop_cmd;
>  
> +                     if (xhci->hci_version < 0x100)
> +                             break;
>                       /*
>                        * Section 4.11.7.1 TD Fragments states that a link
>                        * TRB must only occur at the boundary between

I unintentionally replied to Sarah's email.  This is a cc to the list that
the above patch restores normal behavior to my ASMedia adapter.


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to