This patch makes it possible to set the chipidea udc into full-speed only mode.
It is set by the oftree property "maximum-speed = full-speed".
Signed-off-by: Michael Grzeschik <m.grzesc...@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <m...@pengutronix.de>
---
Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt | 2 ++
drivers/usb/chipidea/bits.h | 2 ++
drivers/usb/chipidea/core.c | 11 +++++++++++
include/linux/usb/chipidea.h | 1 +
4 files changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
index b4b5b79..a6a32cb 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
@@ -18,6 +18,7 @@ Optional properties:
- vbus-supply: regulator for vbus
- disable-over-current: disable over current detect
- external-vbus-divider: enables off-chip resistor divider for Vbus
+- maximum-speed: limit the maximum connection speed to "full-speed".
Examples:
usb@02184000 { /* USB OTG */
@@ -28,4 +29,5 @@ usb@02184000 { /* USB OTG */
fsl,usbmisc = <&usbmisc 0>;
disable-over-current;
external-vbus-divider;
+ maximum-speed = "full-speed";
};
diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index a857131..83d06c1 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -50,12 +50,14 @@
#define PORTSC_PTC (0x0FUL << 16)
#define PORTSC_PHCD(d) ((d) ? BIT(22) : BIT(23))
/* PTS and PTW for non lpm version only */
+#define PORTSC_PFSC BIT(24)
#define PORTSC_PTS(d) \
(u32)((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0))
#define PORTSC_PTW BIT(28)
#define PORTSC_STS BIT(29)
/* DEVLC */
+#define DEVLC_PFSC BIT(23)
#define DEVLC_PSPD (0x03UL << 25)
#define DEVLC_PSPD_HS (0x02UL << 25)
#define DEVLC_PTW BIT(27)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 33f22bc..e813bf1 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -64,6 +64,7 @@
#include <linux/usb/otg.h>
#include <linux/usb/chipidea.h>
#include <linux/usb/of.h>
+#include <linux/of.h>
#include <linux/phy.h>
#include <linux/regulator/consumer.h>
@@ -298,6 +299,13 @@ int hw_device_reset(struct ci_hdrc *ci, u32 mode)
if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
+ if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
+ if (ci->hw_bank.lpm)
+ hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
+ else
+ hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
+ }
+
/* USBMODE should be configured step by step */
hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
hw_write(ci, OP_USBMODE, USBMODE_CM, mode);
@@ -412,6 +420,9 @@ static int ci_get_platdata(struct device *dev,
}
}
+ if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
+ platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
+
return 0;
}
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 708bd11..bbe779f 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -25,6 +25,7 @@ struct ci_hdrc_platform_data {
*/
#define CI_HDRC_DUAL_ROLE_NOT_OTG BIT(4)
#define CI_HDRC_IMX28_WRITE_FIX BIT(5)
+#define CI_HDRC_FORCE_FULLSPEED BIT(6)
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
