From: Jay S
> [2.] I have a 1 TB Western Digital drive in a USB 3.0 HDD dock that will
> not automount while XHCI is enabled in the BIOS. If I disable XHCI in
> the BIOS, it automounts normally. I've tried an external USB 3.0
> enclosure and two different brands of USB 3.0 HDD docks (that use
> different chipsets) with the 1 TB drive and it still will not automount.
> Dmesg shows the following when the drive is turned on:
>
> [10813.786820] usb 4-5.3: new SuperSpeed USB device number 4 using xhci_hcd
> [10823.816236] usb 4-5.3: New USB device found, idVendor=174c, idProduct=5106
> [10823.816245] usb 4-5.3: New USB device strings: Mfr=2, Product=3,
> SerialNumber=1
> [10823.816250] usb 4-5.3: Product: AS2105
> [10823.816255] usb 4-5.3: Manufacturer: ASMedia
> [10828.823853] usb 4-5.3: can't set config #1, error -110
I think that is an ETIMEDOUT error sending USB_REQ_SET_CONFIGURATION
from usb_reset_configuration() in usb/core/message.c
I presume this is plugged into one of the motherboard USB3 sockets
(so using the intel xhci host controller)?
Have you tried any other USB3 devices?
There might be a more generic problem with USB3 on that motherboard.
David
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
