[PATCH 16/26] USB: pl2303: add quirk for legacy devices

[Johan Hovold]

Add quirk for legacy devices (type 0 and 1) rather than testing on
device type throughout the driver.

Signed-off-by: Johan Hovold <jhov...@gmail.com>
---
 drivers/usb/serial/pl2303.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 52f0c96cd98d..014dea1e6d03 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -33,6 +33,7 @@
 
 
 #define PL2303_QUIRK_UART_STATE_IDX0           BIT(0)
+#define PL2303_QUIRK_LEGACY                    BIT(1)
 
 static const struct usb_device_id id_table[] = {
        { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
@@ -224,6 +225,8 @@ static int pl2303_startup(struct usb_serial *serial)
 
        spriv->type = type;
        spriv->quirks = (unsigned long)usb_get_serial_data(serial);
+       if (type == TYPE_01)
+               spriv->quirks |= PL2303_QUIRK_LEGACY;
 
        usb_set_serial_data(serial, spriv);
 
@@ -237,7 +240,7 @@ static int pl2303_startup(struct usb_serial *serial)
        pl2303_vendor_read(serial, 0x8383, buf);
        pl2303_vendor_write(serial, 0, 1);
        pl2303_vendor_write(serial, 1, 0);
-       if (type == TYPE_01)
+       if (spriv->quirks & PL2303_QUIRK_LEGACY)
                pl2303_vendor_write(serial, 2, 0x24);
        else
                pl2303_vendor_write(serial, 2, 0x44);
@@ -531,7 +534,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
        }
 
        if (C_CRTSCTS(tty)) {
-               if (spriv->type == TYPE_01)
+               if (spriv->quirks & PL2303_QUIRK_LEGACY)
                        pl2303_vendor_write(serial, 0x0, 0x41);
                else
                        pl2303_vendor_write(serial, 0x0, 0x61);
@@ -571,7 +574,7 @@ static int pl2303_open(struct tty_struct *tty, struct 
usb_serial_port *port)
        struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
        int result;
 
-       if (spriv->type == TYPE_01) {
+       if (spriv->quirks & PL2303_QUIRK_LEGACY) {
                usb_clear_halt(serial->dev, port->write_urb->pipe);
                usb_clear_halt(serial->dev, port->read_urb->pipe);
        } else {
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html