On Fri, Dec 20, 2013 at 09:49:58AM -0600, Felipe Balbi wrote: > On Thu, Dec 19, 2013 at 10:20:48PM -0300, Ezequiel Garcia wrote: > > This USB controller is dual-role, but can also work in host-only mode. > > There's no reason to condition the entire driver to USB_GADGET. Fix this by > > removing the dependency. > > > > Tested on a Beaglebone black (AM335x) using a regular USB mass storage > > device. > > > > Signed-off-by: Ezequiel Garcia <ezequiel.gar...@free-electrons.com> > > --- > > drivers/usb/musb/Kconfig | 1 - > > 1 file changed, 1 deletion(-) > > > > diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig > > index 57dfc0c..2119370 100644 > > --- a/drivers/usb/musb/Kconfig > > +++ b/drivers/usb/musb/Kconfig > > @@ -6,7 +6,6 @@ > > # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller > > config USB_MUSB_HDRC > > tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' > > - depends on USB_GADGET > > the correct patch would be to turn this into (USB || USB_GADGET) and fix > the mode selection just like dwc3 is doing. >
Ah, I see now. Let me prepare a v2 then. -- Ezequiel García, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
