Use usb_add_phy_dev instead of usb_add_phy, so that devices can
be bound to the phy. This is needed to set up USB phy for
some internal PCI USB host controllers on R-Car Gen2.
Changes from previous version:
* Fixed function names in the commit log
Signed-off-by: Valentine Barshak <valentine.bars...@cogentembedded.com>
---
drivers/usb/phy/phy-rcar-gen2-usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c
b/drivers/usb/phy/phy-rcar-gen2-usb.c
index db3ab34..551e0a6 100644
--- a/drivers/usb/phy/phy-rcar-gen2-usb.c
+++ b/drivers/usb/phy/phy-rcar-gen2-usb.c
@@ -213,7 +213,7 @@ static int rcar_gen2_usb_phy_probe(struct platform_device
*pdev)
priv->phy.shutdown = rcar_gen2_usb_phy_shutdown;
priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend;
- retval = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
+ retval = usb_add_phy_dev(&priv->phy);
if (retval < 0) {
dev_err(dev, "Failed to add USB phy\n");
return retval;
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
