This was gating hub_activate() from setting change bits, but it has been
replaced by hub->poweroff_bits.
->power_is_on was difficult to read because in some contexts it was the
current power_policy and in other contexts it indicated the power state
(hub_power_on()). In contrast hub->poweroff_bits are always the current
policy.
Signed-off-by: Dan Williams <dan.j.willi...@intel.com>
---
drivers/usb/core/hub.c | 61 +++++++++--------------------------------------
drivers/usb/core/hub.h | 6 ++---
drivers/usb/core/port.c | 5 ++--
3 files changed, 16 insertions(+), 56 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 028f1c061119..d4c2c3a3fb5e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -409,7 +409,7 @@ int usb_clear_port_feature(struct usb_device *hdev, int
port1, int feature)
/*
* USB 2.0 spec Section 11.24.2.13
*/
-static int set_port_feature(struct usb_device *hdev, int port1, int feature)
+int usb_set_port_feature(struct usb_device *hdev, int port1, int feature)
{
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1,
@@ -426,7 +426,7 @@ static void set_port_led(
int selector
)
{
- int status = set_port_feature(hub->hdev, (selector << 8) | port1,
+ int status = usb_set_port_feature(hub->hdev, (selector << 8) | port1,
USB_PORT_FEAT_INDICATOR);
if (status < 0)
dev_dbg (hub->intfdev,
@@ -731,34 +731,6 @@ static void hub_tt_work(struct work_struct *work)
}
/**
- * usb_hub_set_port_power - control hub port's power state
- * @hdev: USB device belonging to the usb hub
- * @hub: target hub
- * @port1: port index
- * @set: expected status
- *
- * call this function to control port's power via setting or
- * clearing the port's PORT_POWER feature.
- *
- * Return: 0 if successful. A negative error code otherwise.
- */
-int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
- int port1, bool set)
-{
- int ret;
- struct usb_port *port_dev = hub->ports[port1 - 1];
-
- if (set)
- ret = set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
- else
- ret = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
-
- if (!ret)
- port_dev->power_is_on = set;
- return ret;
-}
-
-/**
* usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
* @urb: an URB associated with the failed or incomplete split transaction
*
@@ -836,11 +808,9 @@ static unsigned hub_power_on(struct usb_hub *hub, bool
do_delay)
dev_dbg(hub->intfdev, "trying to enable port power on "
"non-switchable hub\n");
for (port1 = 1; port1 <= hub->hdev->maxchild; port1++)
- if (hub->ports[port1 - 1]->power_is_on)
- set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER);
- else
- usb_clear_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_POWER);
+ if (!test_bit(port1, hub->poweroff_bits))
+ usb_set_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_POWER);
/* Wait at least 100 msec for power to become stable */
delay = max(pgood_delay, (unsigned) 100);
@@ -872,7 +842,7 @@ static int hub_hub_status(struct usb_hub *hub,
static int hub_set_port_link_state(struct usb_hub *hub, int port1,
unsigned int link_status)
{
- return set_port_feature(hub->hdev,
+ return usb_set_port_feature(hub->hdev,
port1 | (link_status << 3),
USB_PORT_FEAT_LINK_STATE);
}
@@ -1177,17 +1147,10 @@ static void hub_activate(struct usb_hub *hub, enum
hub_activation_type type)
set_bit(port1, hub->change_bits);
} else if (udev->persist_enabled) {
- struct usb_port *port_dev = hub->ports[port1 - 1];
-
#ifdef CONFIG_PM
udev->reset_resume = 1;
#endif
- /* Don't set the change_bits when the device
- * was powered off.
- */
- if (port_dev->power_is_on)
- set_bit(port1, hub->change_bits);
-
+ set_bit(port1, hub->change_bits);
} else {
/* The power session is gone; tell khubd */
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
@@ -2680,7 +2643,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
/* Reset the port */
for (i = 0; i < PORT_RESET_TRIES; i++) {
- status = set_port_feature(hub->hdev, port1, (warm ?
+ status = usb_set_port_feature(hub->hdev, port1, (warm ?
USB_PORT_FEAT_BH_PORT_RESET :
USB_PORT_FEAT_RESET));
if (status == -ENODEV) {
@@ -3037,7 +3000,7 @@ int usb_port_suspend(struct usb_device *udev,
pm_message_t msg)
* descendants is enabled for remote wakeup.
*/
else if (PMSG_IS_AUTO(msg) || wakeup_enabled_descendants(udev) > 0)
- status = set_port_feature(hub->hdev, port1,
+ status = usb_set_port_feature(hub->hdev, port1,
USB_PORT_FEAT_SUSPEND);
else {
really_suspend = false;
@@ -3364,7 +3327,7 @@ static int hub_suspend(struct usb_interface *intf,
pm_message_t msg)
if (hub_is_superspeed(hdev) && hdev->do_remote_wakeup) {
/* Enable hub to send remote wakeup for all ports. */
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
- status = set_port_feature(hdev,
+ status = usb_set_port_feature(hdev,
port1 |
USB_PORT_FEAT_REMOTE_WAKE_CONNECT |
USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT |
@@ -3595,7 +3558,7 @@ static int usb_set_lpm_timeout(struct usb_device *udev,
return -EINVAL;
}
- ret = set_port_feature(udev->parent,
+ ret = usb_set_port_feature(udev->parent,
USB_PORT_LPM_TIMEOUT(timeout) | udev->portnum,
feature);
if (ret < 0) {
@@ -4465,7 +4428,7 @@ static void hub_port_connect_change(struct usb_hub *hub,
int port1,
/* maybe switch power back on (e.g. root hub was reset) */
if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
&& !port_is_power_on(hub, portstatus))
- set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
+ usb_set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
if (portstatus & USB_PORT_STAT_ENABLE)
goto done;
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 0b9bde67ff8b..cd0c40d959c0 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -84,7 +84,6 @@ struct usb_hub {
* @port_owner: port's owner
* @connect_type: port's connect type
* @portnum: port index num based one
- * @power_is_on: port's power state
* @did_runtime_put: port has done pm_runtime_put().
*/
struct usb_port {
@@ -93,7 +92,6 @@ struct usb_port {
struct dev_state *port_owner;
enum usb_port_connect_type connect_type;
u8 portnum;
- unsigned power_is_on:1;
unsigned did_runtime_put:1;
};
@@ -104,8 +102,8 @@ extern int usb_hub_create_port_device(struct usb_hub *hub,
int port1);
extern void usb_hub_remove_port_device(struct usb_hub *hub,
int port1);
-extern int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub,
- int port1, bool set);
extern struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev);
extern int usb_clear_port_feature(struct usb_device *hdev,
int port1, int feature);
+extern int usb_set_port_feature(struct usb_device *hdev,
+ int port1, int feature);
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 0ecff7d85739..48011263ce35 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -83,7 +83,7 @@ static int usb_port_runtime_resume(struct device *dev)
return -EINVAL;
usb_autopm_get_interface(intf);
- retval = usb_hub_set_port_power(hdev, hub, port1, true);
+ retval = usb_set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
usb_autopm_put_interface(intf);
/* no child? we're done recovering this port */
@@ -111,7 +111,7 @@ static int usb_port_runtime_suspend(struct device *dev)
set_bit(port1, hub->poweroff_bits);
usb_autopm_get_interface(intf);
- retval = usb_hub_set_port_power(hdev, hub, port1, false);
+ retval = usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
if (retval)
clear_bit(port1, hub->poweroff_bits);
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
@@ -148,7 +148,6 @@ int usb_hub_create_port_device(struct usb_hub *hub, int
port1)
hub->ports[port1 - 1] = port_dev;
port_dev->portnum = port1;
- port_dev->power_is_on = true;
port_dev->dev.parent = hub->intfdev;
port_dev->dev.groups = port_dev_group;
port_dev->dev.type = &usb_port_device_type;
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
