On Monday, November 11, 2013 01:47 PM, Alexander Shiyan wrote:
On Monday, November 11, 2013 12:45 PM, Alexander Shiyan wrote:
Hi Alexander,
On Sunday, November 10, 2013 03:18 PM, Alexander Shiyan wrote:
This adds i.MX27 and i.MX31 as the next user of the usbmisc driver.
Signed-off-by: Alexander Shiyan<shc_w...@mail.ru>
---
drivers/usb/chipidea/usbmisc_imx.c | 42
++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/drivers/usb/chipidea/usbmisc_imx.c
b/drivers/usb/chipidea/usbmisc_imx.c
...
+static int usbmisc_imx27_init(struct imx_usbmisc_data *data)
+{
+ unsigned long flags;
+ u32 val;
+
+ switch (data->index) {
+ case 0:
+ val = MX27_OTG_PM_BIT;
+ break;
+ case 1:
+ val = MX27_H1_PM_BIT;
+ break;
+ case 2:
+ val = MX27_H2_PM_BIT;
+ break;
+ default:
+ return -EINVAL;
+ };
+
From my understanding this can not work, the usbmisc->base not point into
the
usb control register (USB_CTRL). Reference manual 30.5.1.1 says
BASE + 0x600
you must add the offset to the readl instruction.
Why not work?
usbotg: usb@10024000
usbh1: usb@10024200
usbh2: usb@10024400
usbmisc: usbmisc@10024600
So, offset to USB_CTRL should already be defined by DTS.
in the usbmisc_imx_probe() the base pointer is loaded from
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
data->base = devm_ioremap_resource(&pdev->dev, res);
(and I did not see any of_ operations)
Yes, and this is an address of usbmisc node, not otg.
Sorry, you are right. I misunderstood because I didn't see any of sample DTS
files define usbmisc yet.
At this point might be good to patch the imx27.dtsi with the usb defines.
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -30,6 +30,9 @@
spi0 = &cspi1;
spi1 = &cspi2;
spi2 = &cspi3;
+ usb0 = &usbotg;
+ usb1 = &usbh1;
+ usb2 = &usbh2;
};
@@ -404,6 +419,44 @@
iram = <&iram>;
};
+ usbotg: usb@10024000 {
+ compatible = "fsl,imx27-usb";
+ reg = <0x10024000 0x200>;
+ interrupts = <56>;
+ clocks = <&clks 75>, <&clks 62>;
+ clock-names = "ipg", "ahb";
+ dr_mode = "host";
+ phy_type = "ulpi";
+ status = "disabled";
+ };
+
+ usbh1: usb@10024200 {
+ compatible = "fsl,imx27-usb";
+ reg = <0x10024200 0x200>;
+ interrupts = <54>;
+ clocks = <&clks 75>, <&clks 62>;
+ clock-names = "ipg", "ahb";
+ dr_mode = "host";
+ phy_type = "serial";
+ status = "disabled";
+ };
+
+ usbh2: usb@10024400 {
+ compatible = "fsl,imx27-usb";
+ reg = <0x10024400 0x200>;
+ interrupts = <55>;
+ clocks = <&clks 75>, <&clks 62>;
+ clock-names = "ipg", "ahb";
+ dr_mode = "host";
+ phy_type = "ulpi";
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@10024600 {
+ compatible = "fsl,imx27-usb";
+ reg = <0x10024600 0x4>;
+ };
+
Regards
Chris
usbmisc = data;
base is set to 0x10024000
when I look around all other functions init functions did a offset calculation.
Can you point me on this?
For example, for i.MX5 CPUs we calculate only offset to PHY_CTRL_X register
relative to basic offset 0x800, which is already defined in DTS.
...
r
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
