On Fri, Nov 08, 2013 at 10:53:11PM +0100, Colin Leitner wrote:
> This patch removes an erroneous check of CSIZE, which made it impossible to
> set
> CS5.
>
> Compiles clean, but couldn't test against hardware.
>
> Signed-off-by: Colin Leitner <colin.leit...@gmail.com>
Cc: sta...@vger.kernel.org
Signed-off-by: Johan Hovold <jhov...@gmail.com>
> ---
> drivers/usb/serial/spcp8x5.c | 30 ++++++++++++++----------------
> 1 file changed, 14 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
> index 4abac28..5b793c3 100644
> --- a/drivers/usb/serial/spcp8x5.c
> +++ b/drivers/usb/serial/spcp8x5.c
> @@ -348,22 +348,20 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
> }
>
> /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
> - if (cflag & CSIZE) {
> - switch (cflag & CSIZE) {
> - case CS5:
> - buf[1] |= SET_UART_FORMAT_SIZE_5;
> - break;
> - case CS6:
> - buf[1] |= SET_UART_FORMAT_SIZE_6;
> - break;
> - case CS7:
> - buf[1] |= SET_UART_FORMAT_SIZE_7;
> - break;
> - default:
> - case CS8:
> - buf[1] |= SET_UART_FORMAT_SIZE_8;
> - break;
> - }
> + switch (cflag & CSIZE) {
> + case CS5:
> + buf[1] |= SET_UART_FORMAT_SIZE_5;
> + break;
> + case CS6:
> + buf[1] |= SET_UART_FORMAT_SIZE_6;
> + break;
> + case CS7:
> + buf[1] |= SET_UART_FORMAT_SIZE_7;
> + break;
> + default:
> + case CS8:
> + buf[1] |= SET_UART_FORMAT_SIZE_8;
> + break;
> }
>
> /* Set Stop bit2 : 0:1bit 1:2bit */
> --
> 1.7.10.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
