This adds external USB phy support to USB HCD driver that
allows to find and initialize external USB phy, bound to
the HCD when the HCD is added.
The usb_add_hcd function returns -EPROBE_DEFER if the USB
phy, bound to the HCD, is not ready.
If no USB phy is bound, the HCD is initialized as usual.

Signed-off-by: Valentine Barshak <valentine.bars...@cogentembedded.com>
---
 drivers/usb/core/hcd.c   | 20 ++++++++++++++++++++
 drivers/usb/host/Kconfig | 11 +++++++++++
 2 files changed, 31 insertions(+)

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index d939521..da9c4ba 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2597,6 +2597,26 @@ int usb_add_hcd(struct usb_hcd *hcd,
        int retval;
        struct usb_device *rhdev;
 
+#ifdef CONFIG_USB_HCD_EXTERNAL_PHY
+       if (!hcd->phy) {
+               struct usb_phy *phy = usb_get_phy_dev(hcd->self.controller, 0);
+
+               if (IS_ERR(phy)) {
+                       retval = PTR_ERR(phy);
+                       if (retval == -EPROBE_DEFER)
+                               return retval;
+               } else {
+                       retval = usb_phy_init(phy);
+                       if (retval) {
+                               usb_put_phy(phy);
+                               return retval;
+                       }
+                       hcd->phy = phy;
+                       hcd->remove_phy = 1;
+               }
+       }
+#endif
+
        dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
 
        /* Keep old behaviour if authorized_default is not in [0, 1]. */
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index b3f20d7..2e1f2b0 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -706,3 +706,14 @@ config USB_HCD_TEST_MODE
          This option is of interest only to developers who need to validate
          their USB hardware designs.  It is not needed for normal use.  If
          unsure, say N.
+
+config USB_HCD_EXTERNAL_PHY
+       bool "Set up external USB phy bound to the USB HCD"
+       select USB_PHY
+       ---help---
+         Some USB host controllers require an external USB phy.
+         This adds generic USB phy support to the USB HCD driver.
+         When the HCD is being initialized, the HC driver searches
+         for a USB phy, bound to the HCD. If no USB phy is bound
+         to the HCD, the HCD is initialized as usual.
+         If unsure, say N.
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to