Implementation of notify_suspend and notify_resume will be different
according to mxs_phy_platform_flag->flags.
Signed-off-by: Peter Chen <peter.c...@freescale.com>
---
drivers/usb/phy/phy-mxs-usb.c | 54 +++++++++++++++++++++++++++++++++++++---
1 files changed, 50 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 8cdfbf1..c794011 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -161,8 +161,8 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend)
static int mxs_phy_on_connect(struct usb_phy *phy,
enum usb_device_speed speed)
{
- dev_dbg(phy->dev, "%s speed device has connected\n",
- (speed == USB_SPEED_HIGH) ? "high" : "non-high");
+ dev_dbg(phy->dev, "%s device has connected\n",
+ (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
if (speed == USB_SPEED_HIGH)
writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
@@ -174,8 +174,8 @@ static int mxs_phy_on_connect(struct usb_phy *phy,
static int mxs_phy_on_disconnect(struct usb_phy *phy,
enum usb_device_speed speed)
{
- dev_dbg(phy->dev, "%s speed device has disconnected\n",
- (speed == USB_SPEED_HIGH) ? "high" : "non-high");
+ dev_dbg(phy->dev, "%s device has disconnected\n",
+ (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
if (speed == USB_SPEED_HIGH)
writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
@@ -184,6 +184,48 @@ static int mxs_phy_on_disconnect(struct usb_phy *phy,
return 0;
}
+static int mxs_phy_on_suspend(struct usb_phy *phy,
+ enum usb_device_speed speed)
+{
+ struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+ dev_dbg(phy->dev, "%s device has suspended\n",
+ (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
+
+ /* delay 4ms to wait bus entering idle */
+ usleep_range(4000, 5000);
+
+ if (mxs_phy->flags & MXS_PHY_ABNORAML_IN_SUSPEND) {
+ writel_relaxed(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
+ writel_relaxed(0, phy->io_priv + HW_USBPHY_PWD);
+ }
+
+ if (speed == USB_SPEED_HIGH)
+ writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+ phy->io_priv + HW_USBPHY_CTRL_CLR);
+
+ return 0;
+}
+
+/*
+ * The resume signal must be finished here.
+ */
+static int mxs_phy_on_resume(struct usb_phy *phy,
+ enum usb_device_speed speed)
+{
+ dev_dbg(phy->dev, "%s device has resumed\n",
+ (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
+
+ if (speed == USB_SPEED_HIGH) {
+ /* Make sure the device has switched to High-Speed mode */
+ udelay(500);
+ writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+ phy->io_priv + HW_USBPHY_CTRL_SET);
+ }
+
+ return 0;
+}
+
static int mxs_phy_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -239,6 +281,10 @@ static int mxs_phy_probe(struct platform_device *pdev)
mxs_phy->clk = clk;
mxs_phy->flags = platform_flag->flags;
+ if (mxs_phy->flags & MXS_PHY_SENDING_SOF_TOO_FAST) {
+ mxs_phy->phy.notify_suspend = mxs_phy_on_suspend;
+ mxs_phy->phy.notify_resume = mxs_phy_on_resume;
+ }
platform_set_drvdata(pdev, &mxs_phy->phy);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
