Hi Roger,
On Friday 11 October 2013 08:39 PM, Roger Quadros wrote:
> Hi,
>
> On 09/02/2013 06:43 PM, Kishon Vijay Abraham I wrote:
>> Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
>> power_on and power_off the following APIs are used phy_init(), phy_exit(),
>> phy_power_on() and phy_power_off().
>>
>> However using the old USB phy library wont be removed till the PHYs of all
>> other SoC's using dwc3 core is adapted to the Generic PHY Framework.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
>> ---
>> Documentation/devicetree/bindings/usb/dwc3.txt | 6 ++-
>> drivers/usb/dwc3/Kconfig | 1 +
>> drivers/usb/dwc3/core.c | 49
>> ++++++++++++++++++++++++
>> drivers/usb/dwc3/core.h | 7 ++++
>> 4 files changed, 61 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt
>> b/Documentation/devicetree/bindings/usb/dwc3.txt
>> index e807635..471366d 100644
>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
>> @@ -6,11 +6,13 @@ Required properties:
>> - compatible: must be "snps,dwc3"
>> - reg : Address and length of the register set for the device
>> - interrupts: Interrupts used by the dwc3 controller.
>> +
>> +Optional properties:
>> - usb-phy : array of phandle for the PHY device. The first element
>> in the array is expected to be a handle to the USB2/HS PHY and
>> the second element is expected to be a handle to the USB3/SS PHY
>> -
>> -Optional properties:
>> + - phys: from the *Generic PHY* bindings
>> + - phy-names: from the *Generic PHY* bindings
>> - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
>>
>> This is usually a subnode to DWC3 glue to which it is connected.
>> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
>> index cfc16dd..ad7ce83 100644
>> --- a/drivers/usb/dwc3/Kconfig
>> +++ b/drivers/usb/dwc3/Kconfig
>> @@ -3,6 +3,7 @@ config USB_DWC3
>> depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
>> depends on EXTCON
>> select USB_PHY
>> + select GENERIC_PHY
>> select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
>> help
>> Say Y or M here if your system has a Dual Role SuperSpeed
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 428c29e..485d365 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -82,6 +82,12 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
>>
>> usb_phy_init(dwc->usb2_phy);
>> usb_phy_init(dwc->usb3_phy);
>
> How about adding
> + if (dwc->usb2_phy)
> + usb_phy_init(dwc->usb2_phy);
> + if (dwc->usb3_phy)
> + usb_phy_init(dwc->usb3_phy);
Thankfully that usb_phy_init will check if phy is NULL.
>
> both usb phy and generic phy shouldn't be present together.
ok.
>
>> +
>> + if (dwc->usb2_generic_phy)
>> + phy_init(dwc->usb2_generic_phy);
>> + if (dwc->usb3_generic_phy)
>> + phy_init(dwc->usb3_generic_phy);
>> +
>> mdelay(100);
>>
>> /* Clear USB3 PHY reset */
>> @@ -343,6 +349,11 @@ static void dwc3_core_exit(struct dwc3 *dwc)
>> {
>> usb_phy_shutdown(dwc->usb2_phy);
>> usb_phy_shutdown(dwc->usb3_phy);
>
> here as well
>
>> +
>> + if (dwc->usb2_generic_phy)
>> + phy_power_off(dwc->usb2_generic_phy);
>> + if (dwc->usb3_generic_phy)
>> + phy_power_off(dwc->usb3_generic_phy);
>> }
>>
>> #define DWC3_ALIGN_MASK (16 - 1)
>> @@ -427,6 +438,23 @@ static int dwc3_probe(struct platform_device *pdev)
>> dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
>> }
>>
>> + if (of_property_read_bool(node, "phys") || pdata->has_phy) {
>> + dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
>> + if (IS_ERR(dwc->usb2_generic_phy)) {
>> + dev_err(dev, "no usb2 phy configured yet");
>> + return PTR_ERR(dwc->usb2_generic_phy);
>> + }
>> +
>> + dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
>> + if (IS_ERR(dwc->usb3_generic_phy)) {
>> + dev_err(dev, "no usb3 phy configured yet");
>> + return PTR_ERR(dwc->usb3_generic_phy);
>> + }
>
> better to add
> + /* Don't use USB PHY if generic PHY was found */
> + dwc->usb2_phy = dwc->usb3_phy = NULL;
ok.
>
>> + } else {
>
> not required as we've used kzalloc for dwc.
>
>> + dwc->usb2_generic_phy = NULL;
>> + dwc->usb3_generic_phy = NULL;
>> + }
>> +
>> /* default to superspeed if no maximum_speed passed */
>> if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
>> dwc->maximum_speed = USB_SPEED_SUPER;
>> @@ -450,6 +478,11 @@ static int dwc3_probe(struct platform_device *pdev)
>
> if (dwc->usb2_phy)
>
>> usb_phy_set_suspend(dwc->usb2_phy, 0);
>
> if (dwc->usb3_phy)
>
>> usb_phy_set_suspend(dwc->usb3_phy, 0);
>>
>> + if (dwc->usb2_generic_phy)
>> + phy_power_on(dwc->usb2_generic_phy);
>> + if (dwc->usb3_generic_phy)
>> + phy_power_on(dwc->usb3_generic_phy);
>> +
>> spin_lock_init(&dwc->lock);
>> platform_set_drvdata(pdev, dwc);
>>
>> @@ -576,6 +609,11 @@ static int dwc3_remove(struct platform_device *pdev)
>
> if (dwc->usb2_phy)
>> usb_phy_set_suspend(dwc->usb2_phy, 1);
>
> if (dwc->usb3_phy)
>> usb_phy_set_suspend(dwc->usb3_phy, 1);
>>
>> + if (dwc->usb2_generic_phy)
>> + phy_power_off(dwc->usb2_generic_phy);
>> + if (dwc->usb3_generic_phy)
>> + phy_power_off(dwc->usb3_generic_phy);
>> +
>> pm_runtime_put(&pdev->dev);
>> pm_runtime_disable(&pdev->dev);
>>
>> @@ -673,6 +711,11 @@ static int dwc3_suspend(struct device *dev)
>
> if (dwc->usb3_phy)
>> usb_phy_shutdown(dwc->usb3_phy);
>
> if (dwc->usb2_phy)
>> usb_phy_shutdown(dwc->usb2_phy);
>>
>> + if (dwc->usb2_generic_phy)
>> + phy_exit(dwc->usb2_generic_phy);
>> + if (dwc->usb3_generic_phy)
>> + phy_exit(dwc->usb3_generic_phy);
>> +
>> return 0;
>> }
>>
>> @@ -683,6 +726,12 @@ static int dwc3_resume(struct device *dev)
>>
>
> if (dwc->usb3_phy)
>> usb_phy_init(dwc->usb3_phy);
>
> if (dwc->usb2_phy)
>> usb_phy_init(dwc->usb2_phy);
>> +
>> + if (dwc->usb2_generic_phy)
>> + phy_init(dwc->usb2_generic_phy);
>> + if (dwc->usb3_generic_phy)
>> + phy_init(dwc->usb3_generic_phy);
>> +
>> msleep(100);
>>
>> spin_lock_irqsave(&dwc->lock, flags);
>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>> index f8af8d4..01ec7d7 100644
>> --- a/drivers/usb/dwc3/core.h
>> +++ b/drivers/usb/dwc3/core.h
>> @@ -31,6 +31,8 @@
>> #include <linux/usb/gadget.h>
>> #include <linux/usb/otg.h>
>>
>> +#include <linux/phy/phy.h>
>> +
>> /* Global constants */
>> #define DWC3_EP0_BOUNCE_SIZE 512
>> #define DWC3_ENDPOINTS_NUM 32
>> @@ -613,6 +615,8 @@ struct dwc3_scratchpad_array {
>> * @dr_mode: requested mode of operation
>> * @usb2_phy: pointer to USB2 PHY
>> * @usb3_phy: pointer to USB3 PHY
>> + * @usb2_generic_phy: pointer to USB2 PHY
>> + * @usb3_generic_phy: pointer to USB3 PHY
>> * @dcfg: saved contents of DCFG register
>> * @gctl: saved contents of GCTL register
>> * @is_selfpowered: true when we are selfpowered
>> @@ -665,6 +669,9 @@ struct dwc3 {
>> struct usb_phy *usb2_phy;
>> struct usb_phy *usb3_phy;
>>
>> + struct phy *usb2_generic_phy;
>> + struct phy *usb3_generic_phy;
>> +
>> void __iomem *regs;
>> size_t regs_size;
>>
>>
Do you have any suggestions on how to get only individual PHYs? like only
usb2phy or usb3phy?
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
