On Sat, Oct 12, 2013 at 05:05:23PM +0200, Thomas Petazzoni wrote:
> Dear Peter Chen,
>
> On Sat, 12 Oct 2013 17:09:45 +0800, Peter Chen wrote:
> > This property is used to disconnect line between USB PHY and
> > USB controller.
> >
> > Signed-off-by: Peter Chen <peter.c...@freescale.com>
> > ---
> > Documentation/devicetree/bindings/usb/mxs-phy.txt | 4 ++++
> > 1 files changed, 4 insertions(+), 0 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > index 1a9bd85..099b0bb 100644
> > --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
> > @@ -5,6 +5,9 @@ Required properties:
> > - reg: Should contain registers location and length
> > - interrupts: Should contain phy interrupt
> > - fsl,anatop: phandle for anatop register
> > +- disconnect_line_without_vbus: needs to disconnect
> > +connection between USB PHY and controller, it can avoid
> > +unexpected wakeup interrupt when the PHY is out of power
> >
> > Example:
> > usbphy1: usbphy@020c9000 {
> > @@ -12,4 +15,5 @@ usbphy1: usbphy@020c9000 {
> > reg = <0x020c9000 0x1000>;
> > interrupts = <0 44 0x04>;
> > fsl,anatop = <&anatop>;
> > + disconnect_line_without_vbus;
> > };
>
> Device Tree properties use "-" as a separator, not "_". So, it should
> be:
>
> disconnect-line-without-vbus
>
> Also, all your patches touching Device Tree bindings should be Cc'ed to
> the devicetree@ mailing list.
>
Thanks, I will change, and cc DT ML and maintainer, thanks.
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
