Hi,

On Wednesday, October 02, 2013 03:45:42 PM Majunath Goudar wrote:
> From: Manjunath Goudar <manjunath.gou...@linaro.org>
> 
> Suspend scenario in case of ohci-exynos glue was not
> properly handled as it was not suspending generic part
> of ohci controller. Alan Stern suggested, properly handle
> ohci-exynos suspend scenario.
> 
> Calling explicitly the ohci_suspend() routine in
> exynos_ohci_suspend() will ensure proper handling of suspend
> scenario.
> 
> Signed-off-by: Manjunath Goudar <manjunath.gou...@linaro.org>
> Signed-off-by: Manjunath Goudar <csmanjuvi...@gmail.com>
> Acked-by: Alan Stern <st...@rowland.harvard.edu>
> Cc: Arnd Bergmann <a...@arndb.de>
> Cc: Greg KH <g...@kroah.com>
> Cc: linux-usb@vger.kernel.org
> ---
>  drivers/usb/host/ohci-exynos.c |   20 +++++---------------
>  1 file changed, 5 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
> index 3e4bc74..f5f372e 100644
> --- a/drivers/usb/host/ohci-exynos.c
> +++ b/drivers/usb/host/ohci-exynos.c
> @@ -203,24 +203,15 @@ static int exynos_ohci_suspend(struct device *dev)
>       struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
>       struct ohci_hcd *ohci = hcd_to_ohci(hcd);
>       struct platform_device *pdev = to_platform_device(dev);
> +     bool do_wakeup = device_may_wakeup(dev);
>       unsigned long flags;
>       int rc = 0;
>  
> -     /*
> -      * Root hub was already suspended. Disable irq emission and
> -      * mark HW unaccessible, bail out if RH has been resumed. Use
> -      * the spinlock to properly synchronize with possible pending
> -      * RH suspend or resume activity.
> -      */
> -     spin_lock_irqsave(&ohci->lock, flags);
> -     if (ohci->rh_state != OHCI_RH_SUSPENDED &&
> -                     ohci->rh_state != OHCI_RH_HALTED) {
> -             rc = -EINVAL;
> -             goto fail;
> -     }
> -
> -     clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
> +     rc = ohci_suspend(hcd, do_wakeup);

Maybe it would make sense to cleanup ohci_suspend() first (before adding
new ohci_suspend() users) and remove unused do_wakeup parameter?

> +     if (rc)
> +             return rc;
>  
> +     spin_lock_irqsave(&ohci->lock, flags);
>       if (exynos_ohci->otg)
>               exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
>  
> @@ -228,7 +219,6 @@ static int exynos_ohci_suspend(struct device *dev)
>  
>       clk_disable_unprepare(exynos_ohci->clk);
>  
> -fail:
>       spin_unlock_irqrestore(&ohci->lock, flags);
>  
>       return rc;

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to