On Fri, 30 Aug 2013, Philippe De Swert wrote: > Since USB_SS_PORT_LS_U0 is 0x0000 the & operation with the port state would > always be 0. Thus the if would never be true. Moreover USB_PORT_STAT_ENABLE > is 0x0002 and as such would never equal to 1. What we actually look for is a > port that is in U0/link active state.
No, what we actually look for is an _enabled_ port in the U0 state. > Thanks to Alan Stern for suggesting the correct test in this case. > > Found with coverity: CID 744367, CID 145679 > > Signed-off-by: Philippe De Swert <philippe.desw...@jollamobile.com> > --- > drivers/usb/gadget/dummy_hcd.c | 6 ++---- > 1 file changed, 2 insertions(+), 4 deletions(-) > > diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c > index 2e16c9a..f5c03dd 100644 > --- a/drivers/usb/gadget/dummy_hcd.c > +++ b/drivers/usb/gadget/dummy_hcd.c > @@ -311,10 +311,8 @@ static void set_link_state_by_speed(struct dummy_hcd > *dum_hcd) > USB_PORT_STAT_CONNECTION) == 0) > dum_hcd->port_status |= > (USB_PORT_STAT_C_CONNECTION << 16); > - if ((dum_hcd->port_status & > - USB_PORT_STAT_ENABLE) == 1 && > - (dum_hcd->port_status & > - USB_SS_PORT_LS_U0) == 1 && > + if ((dum_hcd->port_status & USB_PORT_STAT_LINK_STATE) > + == USB_SS_PORT_LS_U0 && > dum_hcd->rh_state != DUMMY_RH_SUSPENDED) > dum_hcd->active = 1; > } Do not remove the test for USB_PORT_STAT_ENABLE; correct it. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
