On 08/13/2013 03:03 PM, Bin Liu wrote:
> Sebastian,
Hi Bin,
>>>> + if (musb->port_mode == MUSB_PORT_MODE_HOST) {
>>>> + val = USBMODE_IDDIG_A;
>>>> + val |= USBMODE_ID_MUX_REG;
>>>
> I am going to so some tests today for this. I don't object to use the
> mode register, but am wondering why we have to play with it for
> host-only mode. The ID pin is grounded for host-only mode, which
> should cause the same as setting mode register.
I've been looking at the wiki page and it did not mention the ID pin
for the second port. If it is grounded then this piece can be removed
and the magic trick is just to skip the try_idle() call.
I haven't found anything saying that it is required to clear the
session bin in host mode, only in OTG. And then, I would assume to
receive a session interrupt once we have the proper VBUS level which
does not happen.
> -Bin.
Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
