Hi, On Tue, Aug 06, 2013 at 02:53:11PM +0300, Ivan T. Ivanov wrote: > diff --git a/drivers/usb/dwc3/dwc3-msm.c b/drivers/usb/dwc3/dwc3-msm.c > new file mode 100644 > index 0000000..e509abc > --- /dev/null > +++ b/drivers/usb/dwc3/dwc3-msm.c > @@ -0,0 +1,175 @@ > +#undef CONFIG_REGULATOR
why ??????
> +static int dwc3_msm_probe(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct dwc3_msm *mdwc;
> + struct resource *res;
> + void __iomem *tcsr;
> + int ret = 0;
> +
> + dev_info(&pdev->dev, "MSM DWC3\n");
please don't. This is hardly necessary.
> + mdwc = devm_kzalloc(&pdev->dev, sizeof(*mdwc), GFP_KERNEL);
> + if (!mdwc) {
> + dev_err(&pdev->dev, "not enough memory\n");
this message isn't needed either
> + /*
> + * DWC3 Core requires its CORE CLK (aka master / bus clk) to
> + * run at 125Mhz in SSUSB mode and >60MHZ for HSUSB mode.
> + */
> + clk_set_rate(mdwc->core_clk, 125000000);
if this is dwc3's core clock, why don't we teach dwc3.ko about this
requirement ? Just make sure to have it optional, since x86 and OMAP
wouldn't need direct fiddling with the clocks.
> + clk_prepare_enable(mdwc->core_clk);
> + clk_prepare_enable(mdwc->iface_clk);
> + clk_prepare_enable(mdwc->sleep_clk);
> + clk_prepare_enable(mdwc->utmi_clk);
do you really need to enable your clocks here ? Why don't you enable
them on runtime_resume and disable on runtime_suspend ?
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + tcsr = devm_ioremap_resource(&pdev->dev, res);
> + if (!tcsr) {
> + dev_dbg(&pdev->dev, "tcsr ioremap failed\n");
no need to ioremap, also you're likely leaking clocks and regulators
enabled here.
Make sure to have something like:
if (!tcsr)
goto err_disable_clocks;
/* TODO This has to be revised */\
[...]
> + } else {
> + /* TODO: This has to be revised */
> +
> + /* Enable USB3 on the primary USB port. */
> + writel_relaxed(0x1, tcsr);
> + /*
> + * Ensure that TCSR write is completed before
> + * USB registers initialization.
> + */
> + mb();
why don't you use writel() instead. It will add the memory barrier for
you.
--
balbi
signature.asc
Description: Digital signature
