On 7/31/2013 1:46 AM, Sebastian Andrzej Siewior wrote:
This driver is a redo of my earlier attempt. It uses parts of the
generic PHY driver and uses the new control driver for the register
the phy needs to power on/off the phy. It also enables easy access for
the wakeup register which is not yet implemented.
The difference between the omap attempt is:
- no static holding variable
- one global visible function which exports a struct with callbacks to
access the "control" registers.
Signed-off-by: Sebastian Andrzej Siewior <bige...@linutronix.de>
---
<snip>
+static const struct of_device_id omap_control_usb_id_table[] = {
+ { .compatible = "ti,am335x-ctrl-module", .data = &ctrl_am335x },
+ {}
+};
+MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
+
+static struct platform_driver am335x_control_driver;
+static int match(struct device *dev, void *data)
+{
+ struct device_node *node = (struct device_node *)data;
+ return dev->of_node == node &&
+ dev->driver == &am335x_control_driver.driver;
+}
+
+struct phy_control *am335x_get_phy_control(struct device *dev)
+{
+ struct device_node *node;
+ struct am335x_control_usb *ctrl_usb;
+
+ node = of_parse_phandle(dev->of_node, "ti,ctrl_mod", 0);
+ if (!node)
+ return NULL;
+
+ dev = bus_find_device(&platform_bus_type, NULL, node, match);
of_find_device_by_node doesn't work???
+ ctrl_usb = dev_get_drvdata(dev);
+ if (!ctrl_usb)
+ return NULL;
+ return &ctrl_usb->phy_ctrl;
+}
+EXPORT_SYMBOL_GPL(am335x_get_phy_control);
+
+static int am335x_control_usb_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct am335x_control_usb *ctrl_usb;
+ const struct of_device_id *of_id;
+ const struct phy_control *phy_ctrl;
+
+ of_id = of_match_node(omap_control_usb_id_table, pdev->dev.of_node);
+ if (!of_id)
+ return -EINVAL;
+
+ phy_ctrl = of_id->data;
+
+ ctrl_usb = devm_kzalloc(&pdev->dev, sizeof(*ctrl_usb), GFP_KERNEL);
+ if (!ctrl_usb) {
+ dev_err(&pdev->dev, "unable to alloc memory for control usb\n");
+ return -ENOMEM;
+ }
+
+ ctrl_usb->dev = &pdev->dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "control_dev");
+ ctrl_usb->reset_reg = devm_ioremap_resource(&pdev->dev, res);
As per current DTSI in patch 5 you are mapping from control module base till
0x650.
Cant it be split to 2 registers one mapping for phy on/off and one for phy wkup?
+ if (IS_ERR(ctrl_usb->reset_reg))
+ return PTR_ERR(ctrl_usb->reset_reg);
+ spin_lock_init(&ctrl_usb->lock);
+ ctrl_usb->phy_ctrl = *phy_ctrl;
+
+ dev_set_drvdata(ctrl_usb->dev, ctrl_usb);
+ return 0;
+}
+
+static struct platform_driver am335x_control_driver = {
+ .probe = am335x_control_usb_probe,
+ .driver = {
+ .name = "am335x-control-usb",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(omap_control_usb_id_table),
+ },
+};
+
+module_platform_driver(am335x_control_driver);
+MODULE_LICENSE("GPL v2");
--
-George
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
