This patch provides a cleaner solution to the problem described in
commit 20a677fd.
The goal to be achieved is to force USB_CHIPIDEA=m if either
USB_EHCI_HCD=m or USB_GADGET=m.
If both are 'y' USB_CHIPIDEA may be selected to be 'm' or 'y'.
The old patch had the drawback, that USB_CHIPIDEA could be chosen as
'y' though USB_EHCI_HCD or USB_GADGET (or both) were 'm' leading to a
situation where USB_CHIPIDEA_HOST or USB_CHIPIDEA_UDC vanished from
the config options producing a compilable but dysfunctional driver.
Signed-off-by: Lothar Waßmann <l...@karo-electronics.de>
---
drivers/usb/chipidea/Kconfig | 7 +++----
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index d1bd8ef..4a851e1 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -1,6 +1,6 @@
config USB_CHIPIDEA
tristate "ChipIdea Highspeed Dual Role Controller"
- depends on USB || USB_GADGET
+ depends on (USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD &&
!USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)
help
Say Y here if your system has a dual role high speed USB
controller based on ChipIdea silicon IP. Currently, only the
@@ -12,15 +12,14 @@ if USB_CHIPIDEA
config USB_CHIPIDEA_UDC
bool "ChipIdea device controller"
- depends on USB_GADGET=y || (USB_CHIPIDEA=m && USB_GADGET=m)
+ depends on USB_GADGET
help
Say Y here to enable device controller functionality of the
ChipIdea driver.
config USB_CHIPIDEA_HOST
bool "ChipIdea host controller"
- depends on USB=y
- depends on USB_EHCI_HCD=y || (USB_CHIPIDEA=m && USB_EHCI_HCD=m)
+ depends on USB_EHCI_HCD
select USB_EHCI_ROOT_HUB_TT
help
Say Y here to enable host controller functionality of the
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
