From: Michael Grzeschik <m...@pengutronix.de>
This patch moves the regulator code from ci_hdrc_imx gluecode to the
core layer. It also checks the errorpathes in case the platformglue
didn't prepare an regulator for this driver.
Signed-off-by: Michael Grzeschik <m.grzesc...@pengutronix.de>
---
drivers/usb/chipidea/ci_hdrc_imx.c | 26 ++------------------------
drivers/usb/chipidea/core.c | 16 ++++++++++++++++
include/linux/usb/chipidea.h | 1 +
3 files changed, 19 insertions(+), 24 deletions(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c
b/drivers/usb/chipidea/ci_hdrc_imx.c
index 06bc775..d2937e1 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -19,7 +19,6 @@
#include <linux/dma-mapping.h>
#include <linux/usb/chipidea.h>
#include <linux/clk.h>
-#include <linux/regulator/consumer.h>
#include "ci.h"
#include "ci_hdrc_imx.h"
@@ -31,7 +30,6 @@ struct ci_hdrc_imx_data {
struct usb_phy *phy;
struct platform_device *ci_pdev;
struct clk *clk;
- struct regulator *reg_vbus;
};
static const struct usbmisc_ops *usbmisc_ops;
@@ -134,20 +132,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
goto err_clk;
}
- /* we only support host now, so enable vbus here */
- data->reg_vbus = devm_regulator_get(&pdev->dev, "vbus");
- if (!IS_ERR(data->reg_vbus)) {
- ret = regulator_enable(data->reg_vbus);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to enable vbus regulator, err=%d\n",
- ret);
- goto err_clk;
- }
- } else {
- data->reg_vbus = NULL;
- }
-
pdata.phy = data->phy;
if (!pdev->dev.dma_mask)
@@ -160,7 +144,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev,
"usbmisc init failed, ret=%d\n", ret);
- goto err;
+ goto err_clk;
}
}
@@ -172,7 +156,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"Can't register ci_hdrc platform device, err=%d\n",
ret);
- goto err;
+ goto err_clk;
}
if (usbmisc_ops && usbmisc_ops->post) {
@@ -193,9 +177,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
disable_device:
ci_hdrc_remove_device(data->ci_pdev);
-err:
- if (data->reg_vbus)
- regulator_disable(data->reg_vbus);
err_clk:
clk_disable_unprepare(data->clk);
return ret;
@@ -208,9 +189,6 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
ci_hdrc_remove_device(data->ci_pdev);
- if (data->reg_vbus)
- regulator_disable(data->reg_vbus);
-
if (data->phy) {
usb_phy_shutdown(data->phy);
module_put(data->phy->dev->driver->owner);
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index a5df24c..178b61d 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -57,6 +57,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/usb/ch9.h>
@@ -363,6 +364,21 @@ struct platform_device *ci_hdrc_add_device(struct device
*dev,
goto put_id;
}
+ /* Get the vbus regulator */
+ platdata->reg_vbus = devm_regulator_get(dev, "vbus");
+ if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err;
+ } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
+ platdata->reg_vbus = NULL; /* no vbus regualator is needed */
+ } else if (IS_ERR(platdata->reg_vbus)) {
+ dev_err(&pdev->dev,
+ "Getting regulator error: %ld\n",
+ PTR_ERR(platdata->reg_vbus));
+ ret = PTR_ERR(platdata->reg_vbus);
+ goto err;
+ }
+
pdev->dev.parent = dev;
pdev->dev.dma_mask = dev->dma_mask;
pdev->dev.dma_parms = dev->dma_parms;
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 2562994..118bf66 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -24,6 +24,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
void (*notify_event) (struct ci_hdrc *ci, unsigned event);
+ struct regulator *reg_vbus;
};
/* Default offset of capability registers */
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
