Add phy nodes for AM33XX platform and split the musb nodes
per instance.

Signed-off-by: Sebastian Andrzej Siewior <bige...@linutronix.de>
Signed-off-by: George Cherian <george.cher...@ti.com>
---
 arch/arm/boot/dts/am33xx.dtsi | 68 +++++++++++++++++++++++++++++++++----------
 1 file changed, 53 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 8e1248f..e3890c4 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -326,21 +326,59 @@
                        status = "disabled";
                };
 
-               usb@47400000 {
-                       compatible = "ti,musb-am33xx";
-                       reg = <0x47400000 0x1000        /* usbss */
-                              0x47401000 0x800         /* musb instance 0 */
-                              0x47401800 0x800>;       /* musb instance 1 */
-                       interrupts = <17                /* usbss */
-                                     18                /* musb instance 0 */
-                                     19>;              /* musb instance 1 */
-                       multipoint = <1>;
-                       num-eps = <16>;
-                       ram-bits = <12>;
-                       port0-mode = <3>;
-                       port1-mode = <3>;
-                       power = <250>;
-                       ti,hwmods = "usb_otg_hs";
+               phy1: am335x-usb0@44e10620 {
+                       compatible = "ti,am335x-usb2";
+                       #phy-cells = <0>;
+                       id= <0>;
+               };
+
+               phy2: am335x-usb1@44e10628 {
+                       compatible = "ti,am335x-usb2";
+                       #phy-cells = <0>;
+                       id= <1>;
+               };
+
+               omap_control_usb: omap-control-usb@44e10620 {
+                       compatible = "ti,omap-control-usb";
+                       reg = <0x44e10620 0x10>;
+                       reg-names = "control_dev_conf";
+                       ti,type = <3>;
+               };
+
+                musb: usb@47400000 {
+                        compatible = "ti,musb-am33xx";
+                        reg = <0x47400000 0x1000>;
+                        ranges;
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        interrupts = <17>;
+                        ti,hwmods = "usb_otg_hs";
+
+                        usb0@47401000 {
+                                reg = <0x47401000 0x800>;
+                                interrupts = <18>;
+                                interrupt-names = "mc";
+                                multipoint = <1>;
+                                num-eps = <16>;
+                                ram-bits = <12>;
+                                port-mode = <3>;
+                                power = <250>;
+                                phys = <&phy1>;
+                               phy-names = "am335x-usb0";
+                        };
+
+                        usb1@47401800 {
+                                reg = <0x47401800 0x800>;
+                                interrupts = <19>;
+                                interrupt-names = "mc";
+                                multipoint = <1>;
+                                num-eps = <16>;
+                                ram-bits = <12>;
+                                port-mode = <3>;
+                                power = <250>;
+                                phys = <&phy2>;
+                               phy-names = "am335x-usb1";
+                       };
                };
 
                mac: ethernet@4a100000 {
-- 
1.8.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to