From: Sascha Hauer <s.ha...@pengutronix.de>
Even if a chipidea core is otg capable the board may not be. This allows
to explicitly set the core to host/peripheral mode. Without these flags
the driver falls back to the old behaviour.
Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
Signed-off-by: Alexander Shishkin <alexander.shish...@linux.intel.com>
---
.../devicetree/bindings/usb/ci13xxx-imx.txt | 1 +
drivers/usb/chipidea/core.c | 24 +++++++++++++++-----
include/linux/usb/chipidea.h | 2 +-
3 files changed, 20 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
index 184a8e0..b4b5b79 100644
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -9,6 +9,7 @@ Recommended properies:
- phy_type: the type of the phy connected to the core. Should be one
of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
property the PORTSC register won't be touched
+- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
Optional properties:
- fsl,usbphy: phandler of usb phy that connects to the only one port
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 5e8d1ed..915b486 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -404,6 +404,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *base;
int ret;
+ enum usb_dr_mode dr_mode;
if (!dev->platform_data) {
dev_err(dev, "platform data missing\n");
@@ -455,14 +456,25 @@ static int ci_hdrc_probe(struct platform_device *pdev)
if (!ci->platdata->phy_mode)
ci->platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
+ if (!ci->platdata->dr_mode)
+ ci->platdata->dr_mode = of_usb_get_dr_mode(dev->of_node);
+
+ if (ci->platdata->dr_mode == USB_DR_MODE_UNKNOWN)
+ ci->platdata->dr_mode = USB_DR_MODE_OTG;
+
+ dr_mode = ci->platdata->dr_mode;
/* initialize role(s) before the interrupt is requested */
- ret = ci_hdrc_host_init(ci);
- if (ret)
- dev_info(dev, "doesn't support host\n");
+ if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
+ ret = ci_hdrc_host_init(ci);
+ if (ret)
+ dev_info(dev, "doesn't support host\n");
+ }
- ret = ci_hdrc_gadget_init(ci);
- if (ret)
- dev_info(dev, "doesn't support gadget\n");
+ if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
+ ret = ci_hdrc_gadget_init(ci);
+ if (ret)
+ dev_info(dev, "doesn't support gadget\n");
+ }
if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
dev_err(dev, "no supported roles\n");
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index 1a2aa18..b314647 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -20,7 +20,7 @@ struct ci13xxx_platform_data {
#define CI13XXX_REQUIRE_TRANSCEIVER BIT(1)
#define CI13XXX_PULLUP_ON_VBUS BIT(2)
#define CI13XXX_DISABLE_STREAMING BIT(3)
-
+ enum usb_dr_mode dr_mode;
#define CI13XXX_CONTROLLER_RESET_EVENT 0
#define CI13XXX_CONTROLLER_STOPPED_EVENT 1
void (*notify_event) (struct ci13xxx *ci, unsigned event);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
