The driver supports both ab8500 and ab8505, but the actual phy tuning
values logic sets ab8500 values:
if (!is_ab8500_2p0_or_earlier(ab->ab8500))
which is supposed to set values for ab8500, but incorrectly results true
for ab8505 too.
Fix this by adding an additional is_ab8500(ab->ab8500) check.
Acked-by: Linus Walleij <linus.wall...@linaro.org>
Acked-by: Maxime Coquelin <maxime.coque...@st.com>
Signed-off-by: Fabio Baltieri <fabio.balti...@linaro.org>
---
drivers/usb/phy/phy-ab8500-usb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index bbe51cc..d105cce 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -835,8 +835,8 @@ static int ab8500_usb_probe(struct platform_device *pdev)
return err;
}
- /* Phy tuning values for AB8500 */
- if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
+ /* Phy tuning values for AB8500 > v2.0 */
+ if (is_ab8500(ab->ab8500) && !is_ab8500_2p0_or_earlier(ab->ab8500)) {
/* Enable the PBT/Bank 0x12 access */
err = abx500_set_register_interruptible(ab->dev,
AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
--
1.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
