This patch splits the PCI portion of ohci-hcd out into its
own separate driver module, called ohci-pci. Consistently with the
current practice, the decision whether to build this module is not
user-configurable. If OHCI_PCI are enabled then the module will
be built, always.
V2:
- few specific content of pci related code in ohci_pci_start function has
been moved to ohci_pci_reset
and rest of the generic code is written in ohci_start of ohci-hcd.c file.
Signed-off-by: Manjunath Goudar <manjunath.gou...@linaro.org>
Cc: Arnd Bergmann <a...@arndb.de>
Cc: Greg KH <g...@kroah.com>
Cc: Alan Stern <st...@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
---
drivers/usb/host/Kconfig | 9 ++-
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ohci-hcd.c | 19 +------
drivers/usb/host/ohci-pci.c | 129 +++++++++++++------------------------------
drivers/usb/host/ohci-q.c | 13 +++++
5 files changed, 60 insertions(+), 111 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 7a1a248..3620ecce 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -333,8 +333,13 @@ config USB_ISP1362_HCD
To compile this driver as a module, choose M here: the
module will be called isp1362-hcd.
+config USB_OHCI_PCI
+ tristate
+ depends on USB_OHCI_HCD && PCI
+ default y
+
config USB_OHCI_HCD
- tristate "OHCI HCD support"
+ tristate "OHCI HCD (USB 1.1) support"
depends on USB && USB_ARCH_HAS_OHCI
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
select USB_OTG_UTILS if ARCH_OMAP
@@ -402,7 +407,7 @@ config USB_OHCI_HCD_PPC_OF
default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
config USB_OHCI_HCD_PCI
- bool "OHCI support for PCI-bus USB controllers"
+ tristate "OHCI support for PCI-bus USB controllers"
depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx ||
USB_OHCI_HCD_PPC_OF)
default y
select USB_OHCI_LITTLE_ENDIAN
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index a38d76b..a20a8d9 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
+obj-$(CONFIG_USB_OHCI_PCI) += ohci-pci.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 7922c61..2e62e7d 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -95,7 +95,6 @@ static inline void sb800_prefetch(struct ohci_hcd *ohci, int
on)
#include "ohci-mem.c"
#include "ohci-q.c"
-
/*
* On architectures with edge-triggered interrupts we must never return
* IRQ_NONE.
@@ -585,7 +584,6 @@ int ohci_init(struct ohci_hcd *ohci)
return ret;
}
EXPORT_SYMBOL_GPL(ohci_init);
-
/*-------------------------------------------------------------------------*/
/* Start an OHCI controller, set the BUS operational
@@ -1181,11 +1179,6 @@ MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE ("GPL");
-#ifdef CONFIG_PCI
-#include "ohci-pci.c"
-#define PCI_DRIVER ohci_pci_driver
-#endif
-
#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_SA1111)
#include "ohci-sa1111.c"
#define SA1111_DRIVER ohci_hcd_sa1111_driver
@@ -1281,7 +1274,7 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_platform_driver
#endif
-#if !defined(PCI_DRIVER) && \
+#if !IS_ENABLED(CONFIG_USB_OHCI_PCI) && \
!defined(PLATFORM_DRIVER) && \
!defined(OMAP1_PLATFORM_DRIVER) && \
!defined(OMAP3_PLATFORM_DRIVER) && \
@@ -1356,12 +1349,6 @@ static int __init ohci_hcd_mod_init(void)
goto error_sa1111;
#endif
-#ifdef PCI_DRIVER
- retval = pci_register_driver(&PCI_DRIVER);
- if (retval < 0)
- goto error_pci;
-#endif
-
#ifdef SM501_OHCI_DRIVER
retval = platform_driver_register(&SM501_OHCI_DRIVER);
if (retval < 0)
@@ -1455,10 +1442,6 @@ static int __init ohci_hcd_mod_init(void)
platform_driver_unregister(&SM501_OHCI_DRIVER);
error_sm501:
#endif
-#ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
- error_pci:
-#endif
#ifdef SA1111_DRIVER
sa1111_driver_unregister(&SA1111_DRIVER);
error_sa1111:
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 0b34b59..20f6187 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -14,12 +14,19 @@
* This file is licenced under the GPL.
*/
-#ifndef CONFIG_PCI
-#error "This file is PCI bus glue. CONFIG_PCI must be defined."
-#endif
-
-#include <linux/pci.h>
#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+#include "pci-quirks.h"
+
+#define DRIVER_DESC "OHCI PCI platform driver"
+
+static const char hcd_name[] = "ohci-pci";
/*-------------------------------------------------------------------------*/
@@ -175,19 +182,6 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
return 0;
}
-static void sb800_prefetch(struct ohci_hcd *ohci, int on)
-{
- struct pci_dev *pdev;
- u16 misc;
-
- pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller);
- pci_read_config_word(pdev, 0x50, &misc);
- if (on == 0)
- pci_write_config_word(pdev, 0x50, misc & 0xfcff);
- else
- pci_write_config_word(pdev, 0x50, misc | 0x0300);
-}
-
/* List of quirks for OHCI */
static const struct pci_device_id ohci_pci_quirks[] = {
{
@@ -261,95 +255,27 @@ static int ohci_pci_reset (struct usb_hcd *hcd)
quirk = (void *)quirk_id->driver_data;
ret = quirk(hcd);
}
- }
- if (ret == 0) {
- ohci_hcd_init (ohci);
- return ohci_init (ohci);
- }
- return ret;
-}
-
-
-static int ohci_pci_start (struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
-
#ifdef CONFIG_PM /* avoid warnings about unused pdev */
- if (hcd->self.controller) {
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
-
/* RWC may not be set for add-in PCI cards, since boot
* firmware probably ignored them. This transfers PCI
* PM wakeup capabilities.
*/
if (device_can_wakeup(&pdev->dev))
ohci->hc_control |= OHCI_CTRL_RWC;
- }
#endif /* CONFIG_PM */
-
- ret = ohci_run(hcd);
- if (ret < 0) {
- ohci_err (ohci, "can't start\n");
- ohci_stop (hcd);
}
+ if (ret == 0)
+ return ohci_init(ohci);
return ret;
}
+static struct hc_driver __read_mostly ohci_pci_hc_driver;
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_pci_hc_driver = {
- .description = hcd_name,
- .product_desc = "OHCI Host Controller",
- .hcd_priv_size = sizeof(struct ohci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ohci_irq,
- .flags = HCD_MEMORY | HCD_USB11,
-
- /*
- * basic lifecycle operations
- */
+static const struct ohci_driver_overrides overrides = {
+ .product_desc = "OHCI PCI host controller",
.reset = ohci_pci_reset,
- .start = ohci_pci_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
-
-#ifdef CONFIG_PM
- .pci_suspend = ohci_suspend,
- .pci_resume = ohci_resume,
-#endif
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ohci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
};
-/*-------------------------------------------------------------------------*/
-
-
static const struct pci_device_id pci_ids [] = { {
/* handle any USB OHCI controller */
PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
@@ -377,3 +303,24 @@ static struct pci_driver ohci_pci_driver = {
},
#endif
};
+
+static int __init ohci_pci_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ohci_init_driver(&ohci_pci_hc_driver, &overrides);
+ return pci_register_driver(&ohci_pci_driver);
+}
+module_init(ohci_pci_init);
+
+static void __exit ohci_pci_cleanup(void)
+{
+ pci_unregister_driver(&ohci_pci_driver);
+}
+module_exit(ohci_pci_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 88731b7..a7e8139 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -29,6 +29,19 @@ static void urb_free_priv (struct ohci_hcd *hc, urb_priv_t
*urb_priv)
kfree (urb_priv);
}
+static void sb800_prefetch(struct ohci_hcd *ohci, int on)
+{
+ struct pci_dev *pdev;
+ u16 misc;
+
+ pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller);
+ pci_read_config_word(pdev, 0x50, &misc);
+ if (on == 0)
+ pci_write_config_word(pdev, 0x50, misc & 0xfcff);
+ else
+ pci_write_config_word(pdev, 0x50, misc | 0x0300);
+}
+
/*-------------------------------------------------------------------------*/
/*
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
