On Tue, Mar 12, 2013 at 3:37 PM, kishon <kis...@ti.com> wrote:
> Hi,
>
>
> On Sunday 10 March 2013 06:38 AM, Grazvydas Ignotas wrote:
>>
>> On USB_EVENT_ID event the musb glue enables VBUS by calling
>> omap2430_musb_set_vbus(musb, 1) that sets the session bit, but on
>> USB_EVENT_NONE reverse action is never made, and that breaks PM.
>>
>> Disable VBUS unconditionally on USB_EVENT_NONE to be sure musb
>> session is ended on cable unplug so that PM works.
>>
>> Signed-off-by: Grazvydas Ignotas <nota...@gmail.com>
>> ---
>> drivers/usb/musb/omap2430.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
>> index 2a39c11..d430677 100644
>> --- a/drivers/usb/musb/omap2430.c
>> +++ b/drivers/usb/musb/omap2430.c
>> @@ -296,6 +296,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue
>> *glue)
>> pm_runtime_put_autosuspend(dev);
>> }
>>
>> + omap2430_musb_set_vbus(musb, 0);
>> if (data->interface_type == MUSB_INTERFACE_UTMI) {
>> if (musb->xceiv->otg->set_vbus)
>> otg_set_vbus(musb->xceiv->otg, 0);
>
> Shouldn't this otg_set_vbus be done inside omap2430_musb_set_vbus? Any idea
> why they were doing this only for UTMI?
I would think so too, there is otg_set_vbus() in
omap2430_musb_set_vbus() for enable but not for disable.
I don't know history of this code and didn't want to break existing
functionality.
>
> Thanks
> Kishon
--
GraÅžvydas
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
