On Wed, Feb 13, 2013 at 10:41:28AM +0200, Felipe Balbi wrote:
> Hi,
>
> >
> > Signed-off-by: Peter Chen <peter.c...@freescale.com>
> >
> > diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> > index b57b735..8319d7e 100644
> > --- a/drivers/usb/chipidea/udc.c
> > +++ b/drivers/usb/chipidea/udc.c
> > @@ -1575,12 +1575,17 @@ static int ci13xxx_stop(struct usb_gadget *gadget,
> >
> > spin_lock_irqsave(&ci->lock, flags);
> >
> > + /*
> > + * Put it at the beginning due to avoid calling gadget
> > + * disconnect at _gadget_stop_activity
> > + */
> > + ci->driver = NULL;
> > +
> > if (ci->vbus_active) {
> > hw_device_state(ci, 0);
> > if (ci->platdata->notify_event)
> > ci->platdata->notify_event(ci,
> > CI13XXX_CONTROLLER_STOPPED_EVENT);
> > - ci->driver = NULL;
> > spin_unlock_irqrestore(&ci->lock, flags);
> > _gadget_stop_activity(&ci->gadget);
> > spin_lock_irqsave(&ci->lock, flags);
>
> NACK, this isn't the real problem. The real problem is that chipidea
> shouldn't be calling ->disconnect() by itself when we unload a gadget
> driver.
Yes, you point the root cause, besides, we also need to notify gadget
when the disconnect occurs even the gadget is still there. Below patch
is tested:
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index b57b735..e355914 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -579,9 +579,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
usb_ep_fifo_flush(&ci->ep0out->ep);
usb_ep_fifo_flush(&ci->ep0in->ep);
- if (ci->driver)
- ci->driver->disconnect(gadget);
-
/* make sure to disable all endpoints */
gadget_for_each_ep(ep, gadget) {
usb_ep_disable(ep);
@@ -612,6 +609,11 @@ __acquires(ci->lock)
dbg_event(0xFF, "BUS RST", 0);
+ if (ci->gadget.speed != USB_SPEED_UNKNOWN) {
+ if (ci->driver)
+ ci->driver->disconnect(&ci->gadget);
+ }
+
spin_unlock(&ci->lock);
retval = _gadget_stop_activity(&ci->gadget);
if (retval)
@@ -1373,6 +1375,8 @@ static int ci13xxx_vbus_session(struct usb_gadget
*_gadget, int is_active)
hw_device_state(ci, ci->ep0out->qh.dma);
dev_dbg(ci->dev, "Connected to host\n");
} else {
+ if (ci->driver)
+ ci->driver->disconnect(&ci->gadget);
hw_device_state(ci, 0);
if (ci->platdata->notify_event)
ci->platdata->notify_event(ci,
@@ -1580,13 +1584,14 @@ static int ci13xxx_stop(struct usb_gadget *gadget,
if (ci->platdata->notify_event)
ci->platdata->notify_event(ci,
CI13XXX_CONTROLLER_STOPPED_EVENT);
- ci->driver = NULL;
spin_unlock_irqrestore(&ci->lock, flags);
_gadget_stop_activity(&ci->gadget);
spin_lock_irqsave(&ci->lock, flags);
pm_runtime_put(&ci->gadget.dev);
}
+ ci->driver = NULL;
+
spin_unlock_irqrestore(&ci->lock, flags);
return 0;
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
