From: Manjunath Goudar <manjunath.gou...@linaro.org>
Separate the Atmel host controller driver from ehci-hcd host code
into its own driver module.
Signed-off-by: Manjunath Goudar <manjunath.gou...@linaro.org>
Cc: Alan Stern <st...@rowland.harvard.edu>
Cc: Greg KH <g...@kroah.com>
Cc: Grant Likely <grant.lik...@secretlab.ca>
Cc: Rob Herring <rob.herr...@calxeda.com>
Cc: Andrew Victor <li...@maxim.org.za>
Cc: Nicolas Ferre <nicolas.fe...@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagn...@jcrosoft.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-ker...@vger.kernel.org
---
drivers/usb/host/Kconfig | 7 ++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-atmel.c | 78 ++++++++++++++++++++++-------------------
drivers/usb/host/ehci-hcd.c | 6 +---
4 files changed, 51 insertions(+), 41 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 3689b7b..5a13f9d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -176,6 +176,13 @@ config USB_EHCI_HCD_ORION
---help---
Enables support for the on-chip EHCI controller on
Morvell Orion chips.
+config USB_EHCI_HCD_AT91
+ tristate "Support for Atmel on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && ARCH_AT91
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on
+ Atmel chips.
config USB_EHCI_MSM
bool "Support for MSM on-chip EHCI USB controller"
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 23b07dd..96b4839 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o
obj-$(CONFIG_USB_EHCI_HCD_SPEAR)+= ehci-spear.o
obj-$(CONFIG_USB_EHCI_HCD_ORION)+= ehci-orion.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
+obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 27639487..2f06711 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -15,6 +15,19 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI atmel driver"
+
+static const char hcd_name[] = "ehci-atmel";
+static struct hc_driver __read_mostly ehci_atmel_hc_driver;
/* interface and function clocks */
static struct clk *iclk, *fclk;
@@ -60,41 +73,6 @@ static int ehci_atmel_setup(struct usb_hcd *hcd)
return ehci_setup(hcd);
}
-static const struct hc_driver ehci_atmel_hc_driver = {
- .description = hcd_name,
- .product_desc = "Atmel EHCI UHP HS",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /* generic hardware linkage */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /* basic lifecycle operations */
- .reset = ehci_atmel_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /* managing i/o requests and associated device resources */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /* scheduling support */
- .get_frame_number = ehci_get_frame,
-
- /* root hub support */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
-
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
-
static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
static int ehci_atmel_drv_probe(struct platform_device *pdev)
@@ -210,7 +188,35 @@ static struct platform_driver ehci_atmel_driver = {
.remove = ehci_atmel_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
- .name = "atmel-ehci",
+ .name = hcd_name,
.of_match_table = of_match_ptr(atmel_ehci_dt_ids),
},
};
+
+static const struct ehci_driver_overrides atmel_overrides __initdata = {
+ .reset = ehci_atmel_setup,
+};
+
+static int __init ehci_atmel_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+ ehci_init_driver(&ehci_atmel_hc_driver, &atmel_overrides);
+ return platform_driver_register(&ehci_atmel_driver);
+}
+module_init(ehci_atmel_init);
+
+static void __exit ehci_atmel_cleanup(void)
+{
+ platform_driver_unregister(&ehci_atmel_driver);
+}
+module_exit(ehci_atmel_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+
+MODULE_ALIAS("platform:ehci-atmel");
+MODULE_AUTHOR("Nicolas Ferre");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5a19a57..628ed139 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1272,11 +1272,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_hcd_w90x900_driver
#endif
-#ifdef CONFIG_ARCH_AT91
-#include "ehci-atmel.c"
-#define PLATFORM_DRIVER ehci_atmel_driver
-#endif
-
#ifdef CONFIG_USB_OCTEON_EHCI
#include "ehci-octeon.c"
#define PLATFORM_DRIVER ehci_octeon_driver
@@ -1334,6 +1329,7 @@ MODULE_LICENSE ("GPL");
!defined(PLATFORM_DRIVER) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
!IS_ENABLED(CONFIG_PLAT_SPEAR) && \
+ !IS_ENABLED(CONFIG_ARCH_AT91) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
!defined(XILINX_OF_PLATFORM_DRIVER)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
