On Thu, Jan 17, 2013 at 01:30:23PM +0200, Roger Quadros wrote:
> All ports have similarly named port clocks so we can
> bunch them into a port data structure and use for loop
> to enable/disable the clocks.
>
> Dynamically allocate and get clocks based on number of ports
> available on the platform
>
> Signed-off-by: Roger Quadros <rog...@ti.com>
> ---
> drivers/mfd/omap-usb-host.c | 180 ++++++++++++++++++++++++------------------
> 1 files changed, 103 insertions(+), 77 deletions(-)
>
> diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
> index 779588b..c75b79d 100644
> --- a/drivers/mfd/omap-usb-host.c
> +++ b/drivers/mfd/omap-usb-host.c
> @@ -92,13 +92,12 @@
>
> struct usbhs_hcd_omap {
> int nports;
> + struct clk **utmi_clk;
>
> struct clk *xclk60mhsp1_ck;
> struct clk *xclk60mhsp2_ck;
> - struct clk *utmi_p1_fck;
> - struct clk *usbhost_p1_fck;
> - struct clk *utmi_p2_fck;
> - struct clk *usbhost_p2_fck;
> + struct clk *utmi_p1_gfclk;
> + struct clk *utmi_p2_gfclk;
> struct clk *init_60m_fclk;
> struct clk *ehci_logic_fck;
>
> @@ -276,6 +275,7 @@ static int usbhs_runtime_resume(struct device *dev)
> struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
> struct usbhs_omap_platform_data *pdata = omap->pdata;
> unsigned long flags;
> + int i, r;
>
> dev_dbg(dev, "usbhs_runtime_resume\n");
>
> @@ -285,13 +285,18 @@ static int usbhs_runtime_resume(struct device *dev)
> if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
> clk_enable(omap->ehci_logic_fck);
>
> - if (is_ehci_tll_mode(pdata->port_mode[0]))
> - clk_enable(omap->usbhost_p1_fck);
> - if (is_ehci_tll_mode(pdata->port_mode[1]))
> - clk_enable(omap->usbhost_p2_fck);
> -
> - clk_enable(omap->utmi_p1_fck);
> - clk_enable(omap->utmi_p2_fck);
> + for (i = 0; i < omap->nports; i++) {
> + if (is_ehci_tll_mode(pdata->port_mode[i])) {
> + if (omap->utmi_clk[i]) {
> + r = clk_enable(omap->utmi_clk[i]);
> + if (r) {
> + dev_err(dev,
> + "Can't enable port %d clk : %d\n",
> + i, r);
> + }
> + }
> + }
> + }
you can decrease indentation here a little bit:
for (i = 0; i < omap->nports; i++) {
if (!is_ehci_tll_mode(pdata->port_mode[i]))
continue;
if (!omap->utmi_clk[i])
continue;
r = clk_enable(omap->utmi_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d clk : %d\n",
i, r);
}
}
> @@ -303,18 +308,18 @@ static int usbhs_runtime_suspend(struct device *dev)
> struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
> struct usbhs_omap_platform_data *pdata = omap->pdata;
> unsigned long flags;
> + int i;
>
> dev_dbg(dev, "usbhs_runtime_suspend\n");
>
> spin_lock_irqsave(&omap->lock, flags);
>
> - if (is_ehci_tll_mode(pdata->port_mode[0]))
> - clk_disable(omap->usbhost_p1_fck);
> - if (is_ehci_tll_mode(pdata->port_mode[1]))
> - clk_disable(omap->usbhost_p2_fck);
> -
> - clk_disable(omap->utmi_p2_fck);
> - clk_disable(omap->utmi_p1_fck);
> + for (i = 0; i < omap->nports; i++) {
> + if (is_ehci_tll_mode(pdata->port_mode[i])) {
> + if (omap->utmi_clk[i])
> + clk_disable(omap->utmi_clk[i]);
> + }
> + }
same as above.
--
balbi
signature.asc
Description: Digital signature
