The driver does not have an interrupt handler and
we don't really need a spinlock, so get rid of it.
Signed-off-by: Roger Quadros <rog...@ti.com>
---
drivers/mfd/omap-usb-host.c | 16 ----------------
1 files changed, 0 insertions(+), 16 deletions(-)
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index a58da22..bef7249 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -23,7 +23,6 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
-#include <linux/spinlock.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/platform_data/usb-omap.h>
@@ -108,7 +107,6 @@ struct usbhs_hcd_omap {
struct usbhs_omap_platform_data *pdata;
u32 usbhs_rev;
- spinlock_t lock;
};
/*-------------------------------------------------------------------------*/
@@ -281,14 +279,12 @@ static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
static int usbhs_runtime_resume(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
- unsigned long flags;
struct usbhs_omap_platform_data *pdata = omap->pdata;
int i, r;
dev_dbg(dev, "usbhs_runtime_resume\n");
omap_tll_enable();
- spin_lock_irqsave(&omap->lock, flags);
if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
clk_enable(omap->ehci_logic_fck);
@@ -330,22 +326,17 @@ static int usbhs_runtime_resume(struct device *dev)
}
}
- spin_unlock_irqrestore(&omap->lock, flags);
-
return 0;
}
static int usbhs_runtime_suspend(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
- unsigned long flags;
struct usbhs_omap_platform_data *pdata = omap->pdata;
int i;
dev_dbg(dev, "usbhs_runtime_suspend\n");
- spin_lock_irqsave(&omap->lock, flags);
-
for (i = 0; i < omap->nports; i++) {
switch (pdata->port_mode[i]) {
case OMAP_EHCI_PORT_MODE_HSIC:
@@ -368,7 +359,6 @@ static int usbhs_runtime_suspend(struct device *dev)
if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
clk_disable(omap->ehci_logic_fck);
- spin_unlock_irqrestore(&omap->lock, flags);
omap_tll_disable();
return 0;
@@ -378,7 +368,6 @@ static void omap_usbhs_init(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = omap->pdata;
- unsigned long flags;
unsigned reg;
dev_dbg(dev, "starting TI HSUSB Controller\n");
@@ -397,7 +386,6 @@ static void omap_usbhs_init(struct device *dev)
}
pm_runtime_get_sync(dev);
- spin_lock_irqsave(&omap->lock, flags);
reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
/* setup ULPI bypass and burst configurations */
@@ -460,8 +448,6 @@ static void omap_usbhs_init(struct device *dev)
usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
- spin_unlock_irqrestore(&omap->lock, flags);
-
pm_runtime_put_sync(dev);
if (pdata->ehci_data->phy_reset) {
/* Hold the PHY in RESET for enough time till
@@ -525,8 +511,6 @@ static int usbhs_omap_probe(struct platform_device *pdev)
if (!omap->uhh_base)
return -EADDRNOTAVAIL;
- spin_lock_init(&omap->lock);
-
omap->pdata = pdata;
pm_runtime_enable(dev);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
