On Mon, 30 Sep 2019, David Heinzelmann wrote:
> Hi,
>
> I adjusted the patch. Any comments? If it's okay, I will re-sent the patch
> to the mailing list.
>
> Here is the second version:
>
>
> From dc78b8add72168215b8295e01ce3e2599b4998f7 Mon Sep 17 00:00:00 2001
> From: David Heinzelmann <heinzelmann.da...@gmail.com>
> Date: Mon, 30 Sep 2019 07:11:31 +0200
> Subject: [PATCH v2] Check for changed device descriptors when a
> connection-change
> occurs before validating the connection.
>
> When a port connection-change occurs the hub driver tries to resuscitate an
> existing
> device. Activated from a firmware download a usb device can re-enumerate with
> new or
> changed device descriptors. Therefore it will be checked for changed device
> descriptors
> before the connection is resuscitated and the connection-change event is
> ignored.
The description text should should wrap before 80 characters. Also, the
description should explain the problem you are fixing -- this text does
not explain the problem.
> @@ -5167,7 +5252,9 @@ static void hub_port_connect_change(struct usb_hub
> *hub, int port1,
> {
> struct usb_port *port_dev = hub->ports[port1 - 1];
> struct usb_device *udev = port_dev->child;
> + struct usb_device_descriptor descriptor;
> int status = -ENODEV;
> + int retval;
>
> dev_dbg(&port_dev->dev, "status %04x, change %04x, %s\n", portstatus,
> portchange, portspeed(hub, portstatus));
> @@ -5188,7 +5275,30 @@ static void hub_port_connect_change(struct usb_hub
> *hub, int port1,
> if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
> udev->state != USB_STATE_NOTATTACHED) {
> if (portstatus & USB_PORT_STAT_ENABLE) {
> - status = 0; /* Nothing to do */
> + /* USB-3 connections are initialized
> + * automatically by the host controller
> + * hardware. Therefore check for changed
> + * device descriptors before resuscitating
> + * the device.
> + */
The accepted format for multi-line comments is:
/*
* blah blah blah
* blah blah blah
*/
Also, the commands can extend out farther, as long as they don't go
past the 80-character limit.
> + descriptor = udev->descriptor;
> + retval = usb_get_device_descriptor(udev,
> + sizeof(udev->descriptor));
Two tab stops, not one.
> + if (retval < 0) {
> + dev_dbg (&udev->dev, "can't read device "
> + "descriptor %d\n", retval);
> + } else {
> + if (descriptors_changed(udev, &descriptor,
> + udev->bos)) {
Indentation in continuation lines is two tab stops, not one.
> + dev_dbg(&udev->dev, "device
> descriptor "
> + "has changed\n");
Code in an inner block is supposed to be indented by one tab stop, not
two.
Also, quoted strings are not subject to the 80-character limit. They
are supposed to remain unbroken no matter how far they stretch.
> +
> + /* for disconnect() calls */
> + udev->descriptor = descriptor;
> + } else {
> + status = 0; /* Nothing to do */
> + }
> + }
> #ifdef CONFIG_PM
> } else if (udev->state == USB_STATE_SUSPENDED &&
> udev->persist_enabled) {
Otherwise this looks okay.
Alan Stern
