On Thu, 2019-09-05 at 21:01 +0000, charles.h...@dellteam.com wrote:
> This change adds support to cdc_ncm for ACPI MAC address pass through
> functionality that also exists in the Realtek r8152 driver. This is in
> support of Dell's Universal Dock D6000, to give it the same feature
> capability as is currently available in Windows and advertized on Dell's
> product web site.
>
> Signed-off-by: Charles Hyde <charles.h...@dellteam.com>
> Cc: Mario Limonciello <mario.limoncie...@dell.com>
> Cc: chip.program...@gmail.com
> Cc: Oliver Neukum <oli...@neukum.org>
> Cc: "Rafael J. Wysocki" <r...@rjwysocki.net>
> Cc: Len Brown <l...@kernel.org>
> Cc: linux-usb@vger.kernel.org
> Cc: linux-a...@vger.kernel.org
> ---
> drivers/net/usb/cdc_ncm.c | 74 +++++++++++++++++++++++++++++++++------
> 1 file changed, 64 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
> index 85093579612f..e0152d44f5af 100644
> --- a/drivers/net/usb/cdc_ncm.c
> +++ b/drivers/net/usb/cdc_ncm.c
> @@ -52,6 +52,7 @@
> #include <linux/usb/usbnet.h>
> #include <linux/usb/cdc.h>
> #include <linux/usb/cdc_ncm.h>
> +#include <acpi/acpi_mac_passthru.h>
>
> #if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
> static bool prefer_mbim = true;
> @@ -833,6 +834,45 @@ static const struct net_device_ops cdc_ncm_netdev_ops = {
> .ndo_validate_addr = eth_validate_addr,
> };
>
> +static int get_ethernet_addr(struct usb_interface *intf)
> +{
> + struct sockaddr sa;
> + struct usbnet *dev = usb_get_intfdata(intf);
> + struct cdc_ncm_ctx *ctx;
> + int ret = 0;
> +
> + if (!dev)
> + return 0;
> +
> + ctx = (struct cdc_ncm_ctx *)dev->data[0];
> + if (!ctx->ether_desc)
> + return 0;
> +
> + ret = cdc_ncm_get_ethernet_address(dev, ctx);
> + if (ret) {
> + dev_dbg(&intf->dev, "failed to get mac address\n");
> + return ret;
> + }
> +
> + /* Check for a Dell Universal Dock D6000 before checking if ACPI
> + * supports MAC address pass through.
> + */
> + if (strstr(dev->udev->product, "D6000")) {
> + sa.sa_family = dev->net->type;
> + if (get_acpi_mac_passthru(sa.sa_data)) {
> + if (!memcmp(dev->net->dev_addr, sa.sa_data,
> + ETH_ALEN)) {
> + if (!cdc_ncm_set_ethernet_address(dev, &sa))
How about use one if-statement instead of these three if-statement?
> + memcpy(dev->net->dev_addr, sa.sa_data,
> + ETH_ALEN);
> + }
> + }
> + }
> + dev_info(&intf->dev, "MAC-Address: %pM\n", dev->net->dev_addr);
> +
> + return 0;
> +}
> +
> int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8
> data_altsetting, int drvflags)
> {
> struct cdc_ncm_ctx *ctx;
> @@ -983,14 +1023,8 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct
> usb_interface *intf, u8 data_
> usb_set_intfdata(ctx->data, dev);
> usb_set_intfdata(ctx->control, dev);
>
> - if (ctx->ether_desc) {
> - temp = usbnet_get_ethernet_addr(dev,
> ctx->ether_desc->iMACAddress);
> - if (temp) {
> - dev_dbg(&intf->dev, "failed to get mac address\n");
> - goto error2;
> - }
> - dev_info(&intf->dev, "MAC-Address: %pM\n", dev->net->dev_addr);
> - }
> + if (get_ethernet_addr(intf))
> + goto error2;
>
> /* finish setting up the device specific data */
> cdc_ncm_setup(dev);
> @@ -1716,6 +1750,25 @@ static void cdc_ncm_status(struct usbnet *dev, struct
> urb *urb)
> }
> }
>
> +static int cdc_ncm_resume(struct usb_interface *intf)
> +{
> + int ret;
> +
> + ret = usbnet_resume(intf);
> + if (ret == 0)
> + get_ethernet_addr(intf);
> +
> + return ret;
> +}
> +
> +static int cdc_ncm_post_reset(struct usb_interface *intf)
> +{
> + /* reset the MAC address in case of policy change */
> + get_ethernet_addr(intf);
> +
> + return 0;
> +}
> +
> static const struct driver_info cdc_ncm_info = {
> .description = "CDC NCM",
> .flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
> @@ -1848,8 +1901,9 @@ static struct usb_driver cdc_ncm_driver = {
> .probe = usbnet_probe,
> .disconnect = usbnet_disconnect,
> .suspend = usbnet_suspend,
> - .resume = usbnet_resume,
> - .reset_resume = usbnet_resume,
> + .resume = cdc_ncm_resume,
> + .reset_resume = cdc_ncm_resume,
> + .post_reset = cdc_ncm_post_reset,
> .supports_autosuspend = 1,
> .disable_hub_initiated_lpm = 1,
> };
