Hi Sriharsha,
> -----Original Message-----
> From: Sriharsha Allenki <salle...@codeaurora.org>
> Sent: 2019年5月8日 18:26
> To: Jun Li <jun...@nxp.com>; ba...@kernel.org; gre...@linuxfoundation.org
> Cc: thi...@synopsys.com; linux-usb@vger.kernel.org; dl-linux-imx
> <linux-...@nxp.com>
> Subject: Re: [PATCH] usb: dwc3: move core validation to be after clks enable
>
> Hi Jun Li,
>
> On 5/8/2019 9:54 AM, Jun Li wrote:
> > From: Jun Li <jun...@nxp.com>
> >
> > Register access in core validation may hang before the bulk clks are
> > enabled.
> >
> > Fixes: b873e2d0ea1e ("usb: dwc3: Do core validation early on probe")
> > Signed-off-by: Jun Li <jun...@nxp.com>
> > ---
> > drivers/usb/dwc3/core.c | 12 ++++++------
> > 1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index
> > 4aff1d8..0e49ff3 100644
> > --- a/drivers/usb/dwc3/core.c
> > +++ b/drivers/usb/dwc3/core.c
> > @@ -1423,11 +1423,6 @@ static int dwc3_probe(struct platform_device *pdev)
> > dwc->regs = regs;
> > dwc->regs_size = resource_size(&dwc_res);
> >
> > - if (!dwc3_core_is_valid(dwc)) {
> > - dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
> > - return -ENODEV;
> > - }
> > -
> > dwc3_get_properties(dwc);
> >
> > dwc->reset = devm_reset_control_get_optional_shared(dev, NULL);
> @@
> > -1460,6 +1455,11 @@ static int dwc3_probe(struct platform_device *pdev)
> > if (ret)
> > goto unprepare_clks;
> >
> > + if (!dwc3_core_is_valid(dwc)) {
> > + dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
>
> Please update "ret" here with -ENODEV, else the probe call will return
> success (ret
> is 0).
Correct, I will update and send V2.
Thanks
Jun
>
> > + goto disable_clks;
> > + }
> > +
> > platform_set_drvdata(pdev, dwc);
> > dwc3_cache_hwparams(dwc);
> >
> > @@ -1524,7 +1524,7 @@ static int dwc3_probe(struct platform_device *pdev)
> > err1:
> > pm_runtime_put_sync(&pdev->dev);
> > pm_runtime_disable(&pdev->dev);
> > -
> > +disable_clks:
> > clk_bulk_disable(dwc->num_clks, dwc->clks);
> > unprepare_clks:
> > clk_bulk_unprepare(dwc->num_clks, dwc->clks);
>
> Regards,
>
> Sriharsha
