Initially resetting device address was done in dwc2_hsotg_irq()
interrupt handler. However, when core is hibernated USB RESET
is not handled in dwc2_hsotg_irq() handler, instead USB RESET
interrupt is handled in dwc2_handle_gpwrdn_intr() handler.
- Added reset device address to zero when core exits from gadget
hibernation.
Signed-off-by: Artur Petrosyan <art...@synopsys.com>
Signed-off-by: Minas Harutyunyan <hmi...@synopsys.com>
---
drivers/usb/dwc2/gadget.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index dcb0fbb8bc42..8c3e1f1c1b0f 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -5234,6 +5234,10 @@ int dwc2_gadget_exit_hibernation(struct dwc2_hsotg
*hsotg,
/* Restore GUSBCFG, DCFG and DCTL */
dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
dwc2_writel(hsotg, dr->dcfg, DCFG);
+
+ /* On USB Reset, reset device address to zero */
+ if (reset)
+ dwc2_clear_bit(hsotg, DCFG, DCFG_DEVADDR_MASK);
dwc2_writel(hsotg, dr->dctl, DCTL);
/* De-assert Wakeup Logic */
--
2.11.0
