- In dwc2_port_suspend() function added waiting for the
HPRT0.PrtSusp register field to be set.
- In _dwc2_hcd_suspend() function added checking of
"hsotg->flags.b.port_connect_status" port connection
status if port connection status is 0 then skipping
power saving (entering partial power down mode).
Because if there is no device connected there would
be no need to enter partial power down mode.
- Added "hsotg->bus_suspended = true" beceuse after
entering partial power down in host mode the
bus_suspended flag must be set.
Signed-off-by: Artur Petrosyan <art...@synopsys.com>
---
drivers/usb/dwc2/hcd.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index dd82fa516f3f..1d18258b5ff8 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3479,6 +3479,10 @@ static void dwc2_port_suspend(struct dwc2_hsotg *hsotg,
u16 windex)
hprt0 |= HPRT0_SUSP;
dwc2_writel(hsotg, hprt0, HPRT0);
+ /* Wait for the HPRT0.PrtSusp register field to be set */
+ if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000))
+ dev_warn(hsotg->dev, "Suspend wasn't generated\n");
+
hsotg->bus_suspended = true;
/*
@@ -4488,7 +4492,8 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
if (hsotg->op_state == OTG_STATE_B_PERIPHERAL)
goto unlock;
- if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL)
+ if (hsotg->params.power_down != DWC2_POWER_DOWN_PARAM_PARTIAL ||
+ hsotg->flags.b.port_connect_status == 0)
goto skip_power_saving;
/*
@@ -4514,6 +4519,8 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
goto skip_power_saving;
}
+ hsotg->bus_suspended = true;
+
/* Ask phy to be suspended */
if (!IS_ERR_OR_NULL(hsotg->uphy)) {
spin_unlock_irqrestore(&hsotg->lock, flags);
--
2.11.0
