Hi Jules, Thank you for the patch! Yet something to improve:
[auto build test ERROR on balbi-usb/next] [also build test ERROR on v5.1-rc3 next-20190402] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/Jules-Maselbas/usb-dwc2-Improve-gadget-phy-init/20190403-103251 base: https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next config: i386-randconfig-l1-04030817 (attached as .config) compiler: gcc-5 (Debian 5.5.0-3) 5.4.1 20171010 reproduce: # save the attached .config to linux build tree make ARCH=i386 All errors (new ones prefixed by >>): drivers/usb/dwc2/hcd.c: In function 'dwc2_core_host_init': >> drivers/usb/dwc2/hcd.c:2185:2: error: implicit declaration of function >> 'dwc2_init_fs_ls_pclk_sel' [-Werror=implicit-function-declaration] dwc2_init_fs_ls_pclk_sel(hsotg); ^ cc1: some warnings being treated as errors vim +/dwc2_init_fs_ls_pclk_sel +2185 drivers/usb/dwc2/hcd.c b02038fa John Youn 2016-02-23 2152 b02038fa John Youn 2016-02-23 2153 /** b02038fa John Youn 2016-02-23 2154 * dwc2_core_host_init() - Initializes the DWC_otg controller registers for b02038fa John Youn 2016-02-23 2155 * Host mode b02038fa John Youn 2016-02-23 2156 * b02038fa John Youn 2016-02-23 2157 * @hsotg: Programming view of DWC_otg controller b02038fa John Youn 2016-02-23 2158 * b02038fa John Youn 2016-02-23 2159 * This function flushes the Tx and Rx FIFOs and flushes any entries in the b02038fa John Youn 2016-02-23 2160 * request queues. Host channels are reset to ensure that they are ready for b02038fa John Youn 2016-02-23 2161 * performing transfers. b02038fa John Youn 2016-02-23 2162 */ b02038fa John Youn 2016-02-23 2163 static void dwc2_core_host_init(struct dwc2_hsotg *hsotg) b02038fa John Youn 2016-02-23 2164 { 92a8dd26 Minas Harutyunyan 2018-01-19 2165 u32 hcfg, hfir, otgctl, usbcfg; b02038fa John Youn 2016-02-23 2166 b02038fa John Youn 2016-02-23 2167 dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); b02038fa John Youn 2016-02-23 2168 92a8dd26 Minas Harutyunyan 2018-01-19 2169 /* Set HS/FS Timeout Calibration to 7 (max available value). 92a8dd26 Minas Harutyunyan 2018-01-19 2170 * The number of PHY clocks that the application programs in 92a8dd26 Minas Harutyunyan 2018-01-19 2171 * this field is added to the high/full speed interpacket timeout 92a8dd26 Minas Harutyunyan 2018-01-19 2172 * duration in the core to account for any additional delays 92a8dd26 Minas Harutyunyan 2018-01-19 2173 * introduced by the PHY. This can be required, because the delay 92a8dd26 Minas Harutyunyan 2018-01-19 2174 * introduced by the PHY in generating the linestate condition 92a8dd26 Minas Harutyunyan 2018-01-19 2175 * can vary from one PHY to another. 92a8dd26 Minas Harutyunyan 2018-01-19 2176 */ f25c42b8 Gevorg Sahakyan 2018-07-26 2177 usbcfg = dwc2_readl(hsotg, GUSBCFG); 92a8dd26 Minas Harutyunyan 2018-01-19 2178 usbcfg |= GUSBCFG_TOUTCAL(7); f25c42b8 Gevorg Sahakyan 2018-07-26 2179 dwc2_writel(hsotg, usbcfg, GUSBCFG); 92a8dd26 Minas Harutyunyan 2018-01-19 2180 b02038fa John Youn 2016-02-23 2181 /* Restart the Phy Clock */ f25c42b8 Gevorg Sahakyan 2018-07-26 2182 dwc2_writel(hsotg, 0, PCGCTL); b02038fa John Youn 2016-02-23 2183 b02038fa John Youn 2016-02-23 2184 /* Initialize Host Configuration Register */ b02038fa John Youn 2016-02-23 @2185 dwc2_init_fs_ls_pclk_sel(hsotg); 38e9002b Vardan Mikayelyan 2016-11-14 2186 if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL || 38e9002b Vardan Mikayelyan 2016-11-14 2187 hsotg->params.speed == DWC2_SPEED_PARAM_LOW) { f25c42b8 Gevorg Sahakyan 2018-07-26 2188 hcfg = dwc2_readl(hsotg, HCFG); b02038fa John Youn 2016-02-23 2189 hcfg |= HCFG_FSLSSUPP; f25c42b8 Gevorg Sahakyan 2018-07-26 2190 dwc2_writel(hsotg, hcfg, HCFG); b02038fa John Youn 2016-02-23 2191 } b02038fa John Youn 2016-02-23 2192 b02038fa John Youn 2016-02-23 2193 /* b02038fa John Youn 2016-02-23 2194 * This bit allows dynamic reloading of the HFIR register during b02038fa John Youn 2016-02-23 2195 * runtime. This bit needs to be programmed during initial configuration b02038fa John Youn 2016-02-23 2196 * and its value must not be changed during runtime. b02038fa John Youn 2016-02-23 2197 */ 95832c00 John Youn 2017-01-23 2198 if (hsotg->params.reload_ctl) { f25c42b8 Gevorg Sahakyan 2018-07-26 2199 hfir = dwc2_readl(hsotg, HFIR); b02038fa John Youn 2016-02-23 2200 hfir |= HFIR_RLDCTRL; f25c42b8 Gevorg Sahakyan 2018-07-26 2201 dwc2_writel(hsotg, hfir, HFIR); b02038fa John Youn 2016-02-23 2202 } b02038fa John Youn 2016-02-23 2203 95832c00 John Youn 2017-01-23 2204 if (hsotg->params.dma_desc_enable) { b02038fa John Youn 2016-02-23 2205 u32 op_mode = hsotg->hw_params.op_mode; b02038fa John Youn 2016-02-23 2206 b02038fa John Youn 2016-02-23 2207 if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a || b02038fa John Youn 2016-02-23 2208 !hsotg->hw_params.dma_desc_enable || b02038fa John Youn 2016-02-23 2209 op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE || b02038fa John Youn 2016-02-23 2210 op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE || b02038fa John Youn 2016-02-23 2211 op_mode == GHWCFG2_OP_MODE_UNDEFINED) { b02038fa John Youn 2016-02-23 2212 dev_err(hsotg->dev, b02038fa John Youn 2016-02-23 2213 "Hardware does not support descriptor DMA mode -\n"); b02038fa John Youn 2016-02-23 2214 dev_err(hsotg->dev, b02038fa John Youn 2016-02-23 2215 "falling back to buffer DMA mode.\n"); 95832c00 John Youn 2017-01-23 2216 hsotg->params.dma_desc_enable = false; b02038fa John Youn 2016-02-23 2217 } else { f25c42b8 Gevorg Sahakyan 2018-07-26 2218 hcfg = dwc2_readl(hsotg, HCFG); b02038fa John Youn 2016-02-23 2219 hcfg |= HCFG_DESCDMA; f25c42b8 Gevorg Sahakyan 2018-07-26 2220 dwc2_writel(hsotg, hcfg, HCFG); b02038fa John Youn 2016-02-23 2221 } b02038fa John Youn 2016-02-23 2222 } b02038fa John Youn 2016-02-23 2223 b02038fa John Youn 2016-02-23 2224 /* Configure data FIFO sizes */ b02038fa John Youn 2016-02-23 2225 dwc2_config_fifos(hsotg); b02038fa John Youn 2016-02-23 2226 b02038fa John Youn 2016-02-23 2227 /* TODO - check this */ b02038fa John Youn 2016-02-23 2228 /* Clear Host Set HNP Enable in the OTG Control Register */ f25c42b8 Gevorg Sahakyan 2018-07-26 2229 otgctl = dwc2_readl(hsotg, GOTGCTL); b02038fa John Youn 2016-02-23 2230 otgctl &= ~GOTGCTL_HSTSETHNPEN; f25c42b8 Gevorg Sahakyan 2018-07-26 2231 dwc2_writel(hsotg, otgctl, GOTGCTL); b02038fa John Youn 2016-02-23 2232 b02038fa John Youn 2016-02-23 2233 /* Make sure the FIFOs are flushed */ b02038fa John Youn 2016-02-23 2234 dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */); b02038fa John Youn 2016-02-23 2235 dwc2_flush_rx_fifo(hsotg); b02038fa John Youn 2016-02-23 2236 b02038fa John Youn 2016-02-23 2237 /* Clear Host Set HNP Enable in the OTG Control Register */ f25c42b8 Gevorg Sahakyan 2018-07-26 2238 otgctl = dwc2_readl(hsotg, GOTGCTL); b02038fa John Youn 2016-02-23 2239 otgctl &= ~GOTGCTL_HSTSETHNPEN; f25c42b8 Gevorg Sahakyan 2018-07-26 2240 dwc2_writel(hsotg, otgctl, GOTGCTL); b02038fa John Youn 2016-02-23 2241 95832c00 John Youn 2017-01-23 2242 if (!hsotg->params.dma_desc_enable) { b02038fa John Youn 2016-02-23 2243 int num_channels, i; b02038fa John Youn 2016-02-23 2244 u32 hcchar; b02038fa John Youn 2016-02-23 2245 b02038fa John Youn 2016-02-23 2246 /* Flush out any leftover queued requests */ bea8e86c John Youn 2016-11-03 2247 num_channels = hsotg->params.host_channels; b02038fa John Youn 2016-02-23 2248 for (i = 0; i < num_channels; i++) { f25c42b8 Gevorg Sahakyan 2018-07-26 2249 hcchar = dwc2_readl(hsotg, HCCHAR(i)); b02038fa John Youn 2016-02-23 2250 hcchar &= ~HCCHAR_CHENA; b02038fa John Youn 2016-02-23 2251 hcchar |= HCCHAR_CHDIS; b02038fa John Youn 2016-02-23 2252 hcchar &= ~HCCHAR_EPDIR; f25c42b8 Gevorg Sahakyan 2018-07-26 2253 dwc2_writel(hsotg, hcchar, HCCHAR(i)); b02038fa John Youn 2016-02-23 2254 } b02038fa John Youn 2016-02-23 2255 b02038fa John Youn 2016-02-23 2256 /* Halt all channels to put them into a known state */ b02038fa John Youn 2016-02-23 2257 for (i = 0; i < num_channels; i++) { f25c42b8 Gevorg Sahakyan 2018-07-26 2258 hcchar = dwc2_readl(hsotg, HCCHAR(i)); b02038fa John Youn 2016-02-23 2259 hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS; b02038fa John Youn 2016-02-23 2260 hcchar &= ~HCCHAR_EPDIR; f25c42b8 Gevorg Sahakyan 2018-07-26 2261 dwc2_writel(hsotg, hcchar, HCCHAR(i)); b02038fa John Youn 2016-02-23 2262 dev_dbg(hsotg->dev, "%s: Halt channel %d\n", b02038fa John Youn 2016-02-23 2263 __func__, i); 79d6b8c5 Sevak Arakelyan 2018-01-19 2264 79d6b8c5 Sevak Arakelyan 2018-01-19 2265 if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i), 79d6b8c5 Sevak Arakelyan 2018-01-19 2266 HCCHAR_CHENA, 1000)) { 79d6b8c5 Sevak Arakelyan 2018-01-19 2267 dev_warn(hsotg->dev, "Unable to clear enable on channel %d\n", b02038fa John Youn 2016-02-23 2268 i); b02038fa John Youn 2016-02-23 2269 } b02038fa John Youn 2016-02-23 2270 } b02038fa John Youn 2016-02-23 2271 } b02038fa John Youn 2016-02-23 2272 66e77a24 Razmik Karapetyan 2018-01-24 2273 /* Enable ACG feature in host mode, if supported */ 66e77a24 Razmik Karapetyan 2018-01-24 2274 dwc2_enable_acg(hsotg); 66e77a24 Razmik Karapetyan 2018-01-24 2275 b02038fa John Youn 2016-02-23 2276 /* Turn on the vbus power */ b02038fa John Youn 2016-02-23 2277 dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state); b02038fa John Youn 2016-02-23 2278 if (hsotg->op_state == OTG_STATE_A_HOST) { b02038fa John Youn 2016-02-23 2279 u32 hprt0 = dwc2_read_hprt0(hsotg); b02038fa John Youn 2016-02-23 2280 b02038fa John Youn 2016-02-23 2281 dev_dbg(hsotg->dev, "Init: Power Port (%d)\n", b02038fa John Youn 2016-02-23 2282 !!(hprt0 & HPRT0_PWR)); b02038fa John Youn 2016-02-23 2283 if (!(hprt0 & HPRT0_PWR)) { b02038fa John Youn 2016-02-23 2284 hprt0 |= HPRT0_PWR; f25c42b8 Gevorg Sahakyan 2018-07-26 2285 dwc2_writel(hsotg, hprt0, HPRT0); b02038fa John Youn 2016-02-23 2286 } b02038fa John Youn 2016-02-23 2287 } b02038fa John Youn 2016-02-23 2288 b02038fa John Youn 2016-02-23 2289 dwc2_enable_host_interrupts(hsotg); b02038fa John Youn 2016-02-23 2290 } b02038fa John Youn 2016-02-23 2291 :::::: The code at line 2185 was first introduced by commit :::::: b02038faa7f1b228983d05633c8345f826b20042 usb: dwc2: Move host-specific core functions into hcd.c :::::: TO: John Youn <johny...@synopsys.com> :::::: CC: Felipe Balbi <ba...@kernel.org> --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation
.config.gz
Description: application/gzip
