On Thu, Feb 07, 2019 at 11:18:13AM -0800, Ajay Gupta wrote:
> From: Ajay Gupta <aj...@nvidia.com>
> 
> CCGx has two copies of the firmware in addition to the bootloader.
> If the device is running FW1, FW2 can be updated with the new version.
> Dual firmware mode allows the CCG device to stay in a PD contract and
> support USB PD and Type-C functionality while a firmware update is in
> progress.
> 
> First we read the currently flashed firmware version of both
> primary and secondary firmware and then compare it with
> version of firmware file to determine if flashing is required.
> 
> Command framework is added to support sending commands to CCGx
> controller. We wait for response after sending the command and then
> read the response from RAB_RESPONSE register.
> 
> Below commands are supported,
>       - ENTER_FLASHING
>       - RESET
>       - PDPORT_ENABLE
>       - JUMP_TO_BOOT
>       - FLASH_ROW_RW
>       - VALIDATE_FW
> 
> Command specific mutex lock is also added to sync between driver
> and user threads.
> 
> PD port number information is added which is required while sending
> PD_PORT_ENABLE command
> 
> Signed-off-by: Ajay Gupta <aj...@nvidia.com>

Applied:
https://github.com/krohei/linux/commit/6acc0b6b0b5041432016cd1c7adc8de20e80bf86

thanks,

-- 
heikki

Reply via email to