[PATCH v2 3/9] platform/x86: intel_cht_int33fe: Remove old style mux connections

[Heikki Krogerus]

The new mux connection naming scheme is now in use, so
dropping the connections still using the old names. From now
on the same connection description named "mode-switch" is
used with both the port and the alternate modes, so on CHT
the DP alt mode will use the same connection as the port to
get a handle to the mux device.

Signed-off-by: Heikki Krogerus <heikki.kroge...@linux.intel.com>
---
 drivers/platform/x86/intel_cht_int33fe.c | 21 ++++++---------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/drivers/platform/x86/intel_cht_int33fe.c 
b/drivers/platform/x86/intel_cht_int33fe.c
index 295fe19ad4c2..6fa3cced6f8e 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -32,7 +32,7 @@ struct cht_int33fe_data {
        struct i2c_client *fusb302;
        struct i2c_client *pi3usb30532;
        /* Contain a list-head must be per device */
-       struct device_connection connections[7];
+       struct device_connection connections[4];
 };
 
 /*
@@ -174,22 +174,13 @@ static int cht_int33fe_probe(struct platform_device *pdev)
 
        data->connections[0].endpoint[0] = "port0";
        data->connections[0].endpoint[1] = "i2c-pi3usb30532";
-       data->connections[0].id = "typec-switch";
+       data->connections[0].id = "orientation-switch";
        data->connections[1].endpoint[0] = "port0";
        data->connections[1].endpoint[1] = "i2c-pi3usb30532";
-       data->connections[1].id = "typec-mux";
-       data->connections[2].endpoint[0] = "port0";
-       data->connections[2].endpoint[1] = "i2c-pi3usb30532";
-       data->connections[2].id = "idff01m01";
-       data->connections[3].endpoint[0] = "i2c-fusb302";
-       data->connections[3].endpoint[1] = "intel_xhci_usb_sw-role-switch";
-       data->connections[3].id = "usb-role-switch";
-       data->connections[4].endpoint[0] = "port0";
-       data->connections[4].endpoint[1] = "i2c-pi3usb30532";
-       data->connections[4].id = "orientation-switch";
-       data->connections[5].endpoint[0] = "port0";
-       data->connections[5].endpoint[1] = "i2c-pi3usb30532";
-       data->connections[5].id = "mode-switch";
+       data->connections[1].id = "mode-switch";
+       data->connections[2].endpoint[0] = "i2c-fusb302";
+       data->connections[2].endpoint[1] = "intel_xhci_usb_sw-role-switch";
+       data->connections[2].id = "usb-role-switch";
 
        device_connections_add(data->connections);
 
-- 
2.20.1