Hi Nagarjuna, avddio_usb-supply should be <&vdd_3v3_sys> .
hvdd_usb-supply should be <&vdd__1v8> . Thanks, JC On 1/3/19 6:04 PM, Nagarjuna Kristam wrote:
Enable XUSB device mode driver for USB0 slot on Jetson TX1. Signed-off-by: Nagarjuna Kristam <nkris...@nvidia.com> --- arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 985777c..293b95f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1325,6 +1325,21 @@ status = "okay"; };+ extcon_usb: extcon_vbus {+ compatible = "linux,extcon-usb-gpio"; + vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) 1>; + }; + + xudc@700d0000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>; + phy-names = "usb2"; + avddio_usb-supply = <&vdd_pex_1v05>; + hvdd_usb-supply = <&vdd_3v3_sys>; + avdd_pll_utmip-supply = <&vdd_1v8>; + extcon = <&extcon_usb>; + status = "okay"; + }; + sata@70020000 { status = "okay"; phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
