From: Dmitry Bezrukov <dmitry.bezru...@aquantia.com>
Add necessary defines to read phy registers and temparature
Signed-off-by: Dmitry Bezrukov <dmitry.bezru...@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russk...@aquantia.com>
---
drivers/net/usb/aqc111.c | 5 +++++
drivers/net/usb/aqc111.h | 11 +++++++++++
2 files changed, 16 insertions(+)
diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c
index 57f1c94fca0b..8867f6a3eaa7 100644
--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -193,6 +193,11 @@ static int aqc111_write16_cmd_async(struct usbnet *dev, u8
cmd, u16 value,
sizeof(tmp), &tmp);
}
+static int aqc111_mdio_read(struct usbnet *dev, u16 value, u16 index, u16
*data)
+{
+ return aqc111_read16_cmd(dev, AQ_PHY_CMD, value, index, data);
+}
+
static void aqc111_get_drvinfo(struct net_device *net,
struct ethtool_drvinfo *info)
{
diff --git a/drivers/net/usb/aqc111.h b/drivers/net/usb/aqc111.h
index 4d68b3a6067c..359663635b49 100644
--- a/drivers/net/usb/aqc111.h
+++ b/drivers/net/usb/aqc111.h
@@ -18,9 +18,20 @@
#define AQ_ACCESS_MAC 0x01
#define AQ_FLASH_PARAMETERS 0x20
#define AQ_PHY_POWER 0x31
+#define AQ_PHY_CMD 0x32
#define AQ_WOL_CFG 0x60
#define AQ_PHY_OPS 0x61
+#define AQC111_PHY_ID 0x00
+#define AQ_PHY_ADDR(mmd) ((AQC111_PHY_ID << 8) | (mmd))
+
+#define AQ_PHY_GLOBAL_MMD 0x1E
+#define AQ_PHY_GLOBAL_ADDR AQ_PHY_ADDR(AQ_PHY_GLOBAL_MMD)
+
+#define AQ_GLB_THERMAL_STATUS1 0xC820
+#define AQ_GLB_THERMAL_STATUS2 0xC821
+ #define AQ_THERM_ST_READY 0x0001
+
#define AQ_USB_PHY_SET_TIMEOUT 10000
#define AQ_USB_SET_TIMEOUT 4000
--
2.17.1
