>Hi,
>
>>> Patch adds set of generic functions used for handling interrupts
>>> generated by controller. Interrupt related functions are divided
>>> into three groups. The first is related to ep0 and is placed in ep0.c.
>>> The second is responsible for non-default endpoints and is
>>> implemented in gadget.c file. The last group is not related to
>>> endpoints interrupts and is placed in gadget.c.
>>> All groups have common entry point in cdns3_irq_handler_thread function.
>>>
>>> Signed-off-by: Pawel Laszczak <paw...@cadence.com>
>>> ---
>>> drivers/usb/cdns3/ep0.c | 63 +++++++++++
>>> drivers/usb/cdns3/gadget.c | 224 ++++++++++++++++++++++++++++++++++++-
>>> drivers/usb/cdns3/gadget.h | 1 +
>>> 3 files changed, 287 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c
>>> index d05169e73631..eb92fd234bd7 100644
>>> --- a/drivers/usb/cdns3/ep0.c
>>> +++ b/drivers/usb/cdns3/ep0.c
>>> @@ -90,6 +90,69 @@ static void cdns3_set_hw_configuration(struct
>>> cdns3_device *priv_dev)
>>> }
>>> }
>>>
>>> +static void __pending_setup_status_handler(struct cdns3_device *priv_dev)
>>> +{
>>> + //TODO: Implements this function
>>> +}
>>> +
>>> +/**
>>> + * cdns3_ep0_setup_phase - Handling setup USB requests
>>> + * @priv_dev: extended gadget object
>>> + */
>>> +static void cdns3_ep0_setup_phase(struct cdns3_device *priv_dev)
>>> +{
>>> + //TODO: Implements this function.
>>> +}
>>> +
>>> +static void cdns3_transfer_completed(struct cdns3_device *priv_dev)
>>> +{
>>> + //TODO: Implements this function
>>> +}
>>> +
>>> +/**
>>> + * cdns3_check_ep0_interrupt_proceed - Processes interrupt related to
>>> endpoint 0
>>> + * @priv_dev: extended gadget object
>>> + * @dir: 1 for IN direction, 0 for OUT direction
>>> + */
>>> +void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int
>>> dir)
>>> +{
>>> + struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
>>> + u32 ep_sts_reg;
>>> +
>>> + cdns3_select_ep(priv_dev, 0 | (dir ? USB_DIR_IN : USB_DIR_OUT));
>>> + ep_sts_reg = readl(®s->ep_sts);
>>> +
>>> + __pending_setup_status_handler(priv_dev);
>>> +
>>> + if ((ep_sts_reg & EP_STS_SETUP) && dir == 0) {
>>> + struct usb_ctrlrequest *setup = priv_dev->setup;
>>> +
>>> + writel(EP_STS_SETUP | EP_STS_IOC | EP_STS_ISP, ®s->ep_sts);
>>
>>instead you can just clear all events at the end of this function by
>> writel(ep_sts_reg, ®s->ep_sts);
>
>But I can delete events that can appear during processing this function.
>I think that safer is to add this fragment at the beginning, below line
>ep_sts_reg = readl(®s->ep_sts);
>
>
>>> +
>>> + priv_dev->ep0_data_dir = setup->bRequestType & USB_DIR_IN;
>>> + cdns3_ep0_setup_phase(priv_dev);
>>> + ep_sts_reg &= ~(EP_STS_SETUP | EP_STS_IOC | EP_STS_ISP);
>>
>>Not required.
>Why not ? I must clear at least EP_STS_IOC | EP_STS_ISP.
>I don't want to handle the last condition in this function, of course if
>SETUP was reported.
>
>Of course I can also change the construction of function and then I could
>delete this statement.
>>
>>> + }
>>> +
>>> + if (ep_sts_reg & EP_STS_TRBERR)
>>> + writel(EP_STS_TRBERR, &priv_dev->regs->ep_sts);
>>
>>Can be omitted.
>>> +
>>> + if (ep_sts_reg & EP_STS_DESCMIS) {
>>> + writel(EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
>>
>>This as well.
>>> +
>>> + if (dir == 0 && !priv_dev->setup_pending) {
>>> + priv_dev->ep0_data_dir = 0;
>>> + cdns3_ep0_run_transfer(priv_dev, priv_dev->setup_dma,
>>> + 8, 0);
>>> + }
>>> + }
>>> +
>>> + if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) {
>>> + writel(EP_STS_IOC, &priv_dev->regs->ep_sts);
>>
>>this write can be omitted.
>>> + cdns3_transfer_completed(priv_dev);
>>> + }
>>
>>here you can do
>> writel(ep_sts_reg, ®s->ep_sts);
>>> +}
>>> +
>>> /**
>>> * cdns3_gadget_ep0_enable
>>> * Function shouldn't be called by gadget driver,
>>> diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
>>> index c965da16c0c8..309202474e57 100644
>>> --- a/drivers/usb/cdns3/gadget.c
>>> +++ b/drivers/usb/cdns3/gadget.c
>>> @@ -58,6 +58,18 @@ void cdns3_set_register_bit(void __iomem *ptr, u32 mask)
>>> writel(mask, ptr);
>>> }
>>>
>>> +/**
>>> + * cdns3_ep_reg_pos_to_index - Macro converts bit position of ep_ists
>>> register
>>> + * to index of endpoint object in cdns3_device.eps[] container
>>> + * @i: bit position of endpoint for which endpoint object is required
>>> + *
>>> + * Remember that endpoint container doesn't contain default endpoint
>>> + */
>>> +static u8 cdns3_ep_reg_pos_to_index(int i)
>>> +{
>>> + return ((i / 16) + (((i % 16) - 2) * 2));
>>> +}
>>> +
>>> /**
>>> * cdns3_next_request - returns next request from list
>>> * @list: list containing requests
>>> @@ -188,6 +200,21 @@ static void cdns3_ep_stall_flush(struct cdns3_endpoint
>>> *priv_ep)
>>> priv_ep->flags |= EP_STALL;
>>> }
>>>
>>> +/**
>>> + * cdns3_gadget_unconfig - reset device configuration
>>> + * @priv_dev: extended gadget object
>>> + */
>>> +void cdns3_gadget_unconfig(struct cdns3_device *priv_dev)
>>> +{
>>> + /* RESET CONFIGURATION */
>>> + writel(USB_CONF_CFGRST, &priv_dev->regs->usb_conf);
>>> +
>>> + cdns3_enable_l1(priv_dev, 0);
>>> + priv_dev->hw_configured_flag = 0;
>>> + priv_dev->onchip_mem_allocated_size = 0;
>>> + priv_dev->out_mem_is_allocated = 0;
>>> +}
>>> +
>>> void cdns3_enable_l1(struct cdns3_device *priv_dev, int enable)
>>> {
>>> if (enable)
>>> @@ -196,6 +223,23 @@ void cdns3_enable_l1(struct cdns3_device *priv_dev,
>>> int enable)
>>> writel(USB_CONF_L1DS, &priv_dev->regs->usb_conf);
>>> }
>>>
>>> +static enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev)
>>> +{
>>> + u32 reg;
>>> +
>>> + reg = readl(&priv_dev->regs->usb_sts);
>>> +
>>> + if (DEV_SUPERSPEED(reg))
>>> + return USB_SPEED_SUPER;
>>> + else if (DEV_HIGHSPEED(reg))
>>> + return USB_SPEED_HIGH;
>>> + else if (DEV_FULLSPEED(reg))
>>> + return USB_SPEED_FULL;
>>> + else if (DEV_LOWSPEED(reg))
>>> + return USB_SPEED_LOW;
>>> + return USB_SPEED_UNKNOWN;
>>> +}
>>> +
>>> /**
>>> * cdns3_gadget_giveback - call struct usb_request's ->complete callback
>>> * @priv_ep: The endpoint to whom the request belongs to
>>> @@ -221,12 +265,136 @@ void cdns3_gadget_giveback(struct cdns3_endpoint
>>> *priv_ep,
>>> */
>>> int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
>>> struct usb_request *request)
>>> +{
>>> + return 0;
>>> +}
>>> +
>>> +static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
>>> + struct cdns3_endpoint *priv_ep)
>>> {
>>> //TODO: Implements this function.
>>> +}
>>> +
>>> +/**
>>> + * cdns3_check_ep_interrupt_proceed - Processes interrupt related to
>>> endpoint
>>> + * @priv_ep: endpoint object
>>> + *
>>> + * Returns 0
>>> + */
>>> +static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep)
>>> +{
>>> + struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
>>> + struct cdns3_usb_regs __iomem *regs;
>>> + u32 ep_sts_reg;
>>> +
>>> + regs = priv_dev->regs;
>>> +
>>> + cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
>>> + ep_sts_reg = readl(®s->ep_sts);
>>> +
>>> + if (ep_sts_reg & EP_STS_TRBERR)
>>> + writel(EP_STS_TRBERR, ®s->ep_sts);
>>> +
>>> + if (ep_sts_reg & EP_STS_ISOERR)
>>> + writel(EP_STS_ISOERR, ®s->ep_sts);
>>> +
>>> + if (ep_sts_reg & EP_STS_OUTSMM)
>>> + writel(EP_STS_OUTSMM, ®s->ep_sts);
>>> +
>>> + if (ep_sts_reg & EP_STS_NRDY)
>>> + writel(EP_STS_NRDY, ®s->ep_sts);
>>
>>Why check for each bit when you are not doing anything. Instead at the end
>>you could just do
>> writel(ep_sts_reg, ®s->ep_sts)
>>to clear all pending events.
>
>Some time ago I had in these conditions debug messages, but then
>I created the cdns3_decode_epx_irq and I removed them from there.
>
>I will remove them.
>
>>> +
>>> + if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) {
>>> + writel(EP_STS_IOC | EP_STS_ISP, ®s->ep_sts);
>>> + cdns3_transfer_completed(priv_dev, priv_ep);
>>> + }
>>> +
>>> + if (ep_sts_reg & EP_STS_DESCMIS)
>>> + writel(EP_STS_DESCMIS, ®s->ep_sts);
>>>
>>> return 0;
>>> }
>>>
>>> +/**
>>> + * cdns3_check_usb_interrupt_proceed - Processes interrupt related to
>>> device
>>> + * @priv_dev: extended gadget object
>>> + * @usb_ists: bitmap representation of device's reported interrupts
>>> + * (usb_ists register value)
>>> + */
>>> +static void cdns3_check_usb_interrupt_proceed(struct cdns3_device
>>> *priv_dev,
>>> + u32 usb_ists)
>>> +{
>>> + struct cdns3_usb_regs __iomem *regs;
>>> + int speed = 0;
>>> +
>>> + regs = priv_dev->regs;
>>> +
>>> + /* Connection detected */
>>> + if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) {
>>> + writel(USB_ISTS_CON2I | USB_ISTS_CONI, ®s->usb_ists);
>>> + speed = cdns3_get_speed(priv_dev);
>>> +
>>> + dev_dbg(&priv_dev->dev, "Connection detected at speed: %s %d\n",
>>> + usb_speed_string(speed), speed);
>>> +
>>> + priv_dev->gadget.speed = speed;
>>> + priv_dev->is_connected = 1;
>>> + usb_gadget_set_state(&priv_dev->gadget, USB_STATE_POWERED);
>>> + cdns3_ep0_config(priv_dev);
>>> + }
>>> +
>>> + /* SS Disconnection detected */
>>> + if (usb_ists & (USB_ISTS_DIS2I | USB_ISTS_DISI)) {
>>> + dev_dbg(&priv_dev->dev, "Disconnection detected\n");
>>> +
>>> + writel(USB_ISTS_DIS2I | USB_ISTS_DISI, ®s->usb_ists);
>>> + if (priv_dev->gadget_driver &&
>>> + priv_dev->gadget_driver->disconnect) {
>>> + spin_unlock(&priv_dev->lock);
>>> + priv_dev->gadget_driver->disconnect(&priv_dev->gadget);
>>> + spin_lock(&priv_dev->lock);
>>> + }
>>> + priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
>>> + usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED);
>>> + priv_dev->is_connected = 0;
>>> + cdns3_gadget_unconfig(priv_dev);
>>> + }
>>
>>What about non Super-Speed disconnects?
>
>I connect 2 conditions and I forgot to change the comment.
>USB_ISTS_DIS2I - HS/FS disconnection
>USB_ISTS_DISI) - SS disconnection
>
>>
>>> +
>>> + if (usb_ists & USB_ISTS_L2ENTI) {
>>> + dev_dbg(&priv_dev->dev, "Device suspended\n");
>>> + writel(USB_ISTS_L2ENTI, ®s->usb_ists);
>>> + }
>>> +
>>> + /* Exit from standby mode on L2 exit (Suspend in HS/FS or SS) */
>>> + if (usb_ists & USB_ISTS_L2EXTI) {
>>> + dev_dbg(&priv_dev->dev, "[Interrupt] L2 exit detected\n");
>>> + writel(USB_ISTS_L2EXTI, ®s->usb_ists);
>>> + }
>>> +
>>> + /* Exit from standby mode on U3 exit (Suspend in HS/FS or SS). */
>>> + if (usb_ists & USB_ISTS_U3EXTI) {
>>> + dev_dbg(&priv_dev->dev, "U3 exit detected\n");
>>> + writel(USB_ISTS_U3EXTI, ®s->usb_ists);
>>> + }
>>> +
>>> + /* resets cases */
>>> + if (usb_ists & (USB_ISTS_UWRESI | USB_ISTS_UHRESI | USB_ISTS_U2RESI)) {
>>> + writel(USB_ISTS_U2RESI | USB_ISTS_UWRESI | USB_ISTS_UHRESI,
>>> + ®s->usb_ists);
>>> +
>>> + /*read again to check the actuall speed*/
>>> + speed = cdns3_get_speed(priv_dev);
>>> +
>>> + dev_dbg(&priv_dev->dev, "Reset detected at speed: %s %d\n",
>>> + usb_speed_string(speed), speed);
>>> +
>>> + usb_gadget_set_state(&priv_dev->gadget, USB_STATE_DEFAULT);
>>> + priv_dev->gadget.speed = speed;
>>> + cdns3_gadget_unconfig(priv_dev);
>>> + cdns3_ep0_config(priv_dev);
>>> + }
>>> +}
>>> +
>>> /**
>>> * cdns3_irq_handler - irq line interrupt handler
>>> * @cdns: cdns3 instance
>>> @@ -237,8 +405,62 @@ int cdns3_ep_run_transfer(struct cdns3_endpoint
>>> *priv_ep,
>>> */
>>> static irqreturn_t cdns3_irq_handler_thread(struct cdns3 *cdns)
>>> {
>>> + struct cdns3_device *priv_dev;
>>> irqreturn_t ret = IRQ_NONE;
>>> - //TODO: implements this function
>>> + unsigned long flags;
>>> + u32 reg;
>>> +
>>> + priv_dev = container_of(cdns->gadget_dev, struct cdns3_device, dev);
>>> + spin_lock_irqsave(&priv_dev->lock, flags);
>>> +
>>> + /* check USB device interrupt */
>>> + reg = readl(&priv_dev->regs->usb_ists);
>>> + if (reg) {
>>> + dev_dbg(&priv_dev->dev, "IRQ: usb_ists: %08X\n", reg);
>>
>>dev_dbg will be terribly slow to be useful. Tracepoints?
>
>It will be moved to Tracepoint.
>>
>>> + cdns3_check_usb_interrupt_proceed(priv_dev, reg);
>>> + ret = IRQ_HANDLED;
>>> + }
>>> +
>>> + /* check endpoint interrupt */
>>> + reg = readl(&priv_dev->regs->ep_ists);
>>> + if (reg != 0) {
>>> + dev_dbg(&priv_dev->dev, "IRQ ep_ists: %08X\n", reg);
>>> + } else {
>>> + if (USB_STS_CFGSTS(readl(&priv_dev->regs->usb_sts)))
>>> + ret = IRQ_HANDLED;
>>
>>Why is this done. We don't seem to be handling anything here.
>>Don't we need to clear the usb_sts?
>
>This check CFGSTS bit. From controller spec:
>Configuration status -
>1 - device is in the configured state
>0 - device is not configured
>This bit set during SET_CONFIGURATION
>request means that status stage of this
>request was finished successfully, thus device
>configuration was finished successfully
>
>And again, the setting related with setting endpoint configuration.
>
>The author did not mention anything about setting alternate setting
>that require reconfiguring endpoints.
>
>I think that this fragment protects against handling epx before setting
>configuration.
>
>I think that I can omit this fragment, but I need to test it with Command
>Verifier.
>
>Regarding clearing usb_sts, it's cleared but in other functions invoked from
>this one.
>Maybe it could be better to pass to these other function content of usb_ists
>and do
>clearing in one place. It could limit access to registers and make the code
>more readable
Sorry, I am little confused.
We have ep_sts, usb_ists and ep_ists
usb_ists - must be cleared by software
ep_ists - we don't have to clear this register. It's RO. I think that clearing
it by software could
cause some racing.
>>
>>> + goto irqend;
>>> + }
>>> +
>>> + /* handle default endpoint OUT */
>>> + if (reg & EP_ISTS_EP_OUT0) {
>>> + cdns3_check_ep0_interrupt_proceed(priv_dev, 0);
>>> + ret = IRQ_HANDLED;
>>> + }
>>> +
>>> + /* handle default endpoint IN */
>>> + if (reg & EP_ISTS_EP_IN0) {
>>> + cdns3_check_ep0_interrupt_proceed(priv_dev, 1);
>>> + ret = IRQ_HANDLED;
>>> + }
>>> +
>>> + /* check if interrupt from non default endpoint, if no exit */
>>> + reg &= ~(EP_ISTS_EP_OUT0 | EP_ISTS_EP_IN0);
>>> + if (!reg)
>>> + goto irqend;
>>> +
>>> + do {
>>> + unsigned int bit_pos = ffs(reg);
>>> + u32 bit_mask = 1 << (bit_pos - 1);
>>> + int index;
>>> +
>>> + index = cdns3_ep_reg_pos_to_index(bit_pos);
>>> + cdns3_check_ep_interrupt_proceed(priv_dev->eps[index]);
>>> + reg &= ~bit_mask;
>>> + ret = IRQ_HANDLED;
>>> + } while (reg);
>>> +
>>> +irqend:
>>> + spin_unlock_irqrestore(&priv_dev->lock, flags);
>>> return ret;
>>> }
>>>
>>> diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h
>>> index 224f6b830bc9..8c2f363f9340 100644
>>> --- a/drivers/usb/cdns3/gadget.h
>>> +++ b/drivers/usb/cdns3/gadget.h
>>> @@ -1072,6 +1072,7 @@ int cdns3_handshake(void __iomem *ptr, u32 mask, u32
>>> done, int usec);
>>> void cdns3_set_register_bit(void __iomem *ptr, u32 mask);
>>> int cdns3_init_ep0(struct cdns3_device *priv_dev);
>>> void cdns3_ep0_config(struct cdns3_device *priv_dev);
>>> +void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int
>>> dir);
>>> void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep);
>>> void cdns3_enable_l1(struct cdns3_device *priv_dev, int enable);
>>> struct usb_request *cdns3_next_request(struct list_head *list);
>>>
>
>Thanks
>Cheers,
>Pawel
