On Tue, Sep 04, 2018 at 02:34:12PM -0700, Prakruthi Deepak Heragu wrote:
> Documentation for Embedded USB Debugger (EUD) device tree bindings.
>
> Signed-off-by: Satya Durga Srinivasu Prabhala <sat...@codeaurora.org>
> Signed-off-by: Prakruthi Deepak Heragu <pher...@codeaurora.org>
> ---
> .../devicetree/bindings/soc/qcom/qcom,msm-eud.txt | 41
> ++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
> b/Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
> new file mode 100644
> index 0000000..a03021a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,msm-eud.txt
> @@ -0,0 +1,41 @@
> +* Qualcomm Technologies Inc Embedded USB Debugger (EUD)
> +
> +The EUD (Embedded USB Debugger) is a mini-USB hub implemented
> +on chip to support the USB-based debug and trace capabilities.
Is it just for debug and normally bypassed?
> +
> +Required properties:
> +
> + - compatible: Should be "qcom,msm-eud"
Needs to be SoC specific (though a fallback is fine).
> + - interrupts: Interrupt number
> + - reg: Should be address and size of EUD register space
> +
> +Driver notifies clients for VBUS attach/detach and charger enable/disable
Bindings are for h/w blocks, not drivers.
> +events. The link between client and EUD is established via a directed
> +graph. EUD driver has one endpoint of the graph link mentioning EUD as an
> +output link and clients registered for these notifications from the EUD
> +should have the other endpoint of the graph link as an input link.
OF graph is for describing data flows (i.e. h/w connections), not
clients wanting some event.
> Each of
> +these endpoints should contain a 'remote-endpoint' phandle property that
> +points to the corresponding endpoint in the port of the remote device.
You don't need to describe how the graph binding works. Just what the
port assignments are.
I worry this is going to collide with using the graph binding for USB
connectors.
> +
> +An example for EUD device node:
> +
> + eud: qcom,msm-eud@88e0000 {
> + compatible = "qcom,msm-eud";
> + interrupts = <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x88e0000 0x4000>;
> + port {
> + eud_output: endpoint {
> + remote-endpoint = <&usb3_input>;
> + };
> + };
> + };
> +
> +An example for EUD client:
What are possible clients? Could we want to switch clients at runtime?
> +
> + usb3 {
> + port {
> + usb3_input: endpoint {
> + remote-endpoint = <&eud_output>;
> + };
> + };
> + };
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
